JDS Uniphase MAP200-MEDFA-A15580-MFA
The JDS Uniphase MAP200-MEDFA-A15580-MFA is an optical amplifier module designed for use in optical communication systems. It operates at a wavelength of 1558 nm and is part of the MAP200 series, offering amplification to boost signal strength in fiber optic networks.
- Model
- JDS Uniphase MAP200-MEDFA-A15580-MFA
- Calibration
- Available on request
- Price
- $4,800
- Status
- In stock
- RFQ ref
- MAP200-MEDFA-A15580-MFA
This unit
The JDS Uniphase MAP200-MEDFA-A15580-MFA is an Erbium-Doped Fiber Amplifier (EDFA) module engineered for C-band DWDM booster amplification in optical communication systems. Operating at 1558 nm, this module delivers saturated output power of 21 dBm and integrates into the MAP-200 platform - a modular, LXI Class C–compliant test system designed for laboratory and manufacturing environments. The module features FC/APC connectors (MFA type) and accommodates input signals from –18 dBm to +3 dBm with measured small-signal gain and noise figure specifications at –4 dBm input power. Gain flatness is held better than 1.4 dB across the EDFA series. The MAP-200 platform supports hot-swapping, multiple mainframe configurations (3-slot benchtop or 8-slot 19-inch rack, all 3 RU), and provides USB, GPIB, and Ethernet connectivity. IVI drivers enable integration with LabVIEW, Visual C++, Visual Basic, and LabWindows environments.
Technical Specifications
Module Type: Erbium-Doped Fiber Amplifier (EDFA)
Operating Wavelength: 1558 nm
Band: C-band
Saturated Output Power: 21 dBm (at 1558 nm, –4 dBm input)
Gain Flatness: Better than 1.4 dB
Input Power Range: –18 dBm to +3 dBm (displayed)
Connector Type: FC/APC (MFA)
Operating Temperature: 0 to 40°C
Storage Temperature: –30 to 60°C
Humidity: Maximum 95% RH non-condensing (0 to 45°C)
Key Features
DWDM booster amplifier optimized for high-density wavelength-division systems
Hot-swappable module architecture
Gain and noise figure measured at standardized –4 dBm input power
LXI Class C compliance for automated test environments
Benchtop-ready mainframe with vibration isolation feet
Typical Applications
Long-haul optical communication system amplification
DWDM signal conditioning and boost stages
Laboratory optical system characterization
Manufacturing test and validation
Compatibility & Integration
MAP-200 platform supports three-slot benchtop and eight-slot 19-inch rack configurations
All mainframes are 3 RU height
USB, GPIB, and Ethernet interfaces
IVI driver support for LabVIEW, Visual C++, Visual Basic, and LabWindows
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | '-18 dBm to +3 dBm input |
| 21 dBm saturated output | Wavelength Range | 1558 nm |
JDS Uniphase MAP200-MEDFA-A15580-MFA — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MAP200-MEDFA-A15580-MFA. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase MAP200-MEDFA-A15580-MFA faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
JDS Uniphase MAP200-MEDFA-A15580-MFA price
This JDS Uniphase MAP200-MEDFA-A15580-MFA is listed at $4,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MAP200-MEDFA-A15580-MFA calibration cost
NIST-traceable calibration for the JDS Uniphase MAP200-MEDFA-A15580-MFA is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
