JDS Uniphase OAB1558+22FA0
JDS Uniphase Optical Amplifiers. Model: OAB1558+22FA0.
- Model
- JDS Uniphase OAB1558+22FA0
- Calibration
- Available on request
- Price
- $5,800
- Status
- In stock
- RFQ ref
- OAB1558+22FA0
This unit
The JDS Uniphase OAB1558+22FA0 is a C-band booster amplifier for DWDM telecommunications systems, delivering high saturated output power across the 1528–1565 nm window. This multichannel optical amplifier achieves minimum 20 dB small-signal gain with a noise figure not exceeding 5.5 dB, making it suitable for signal regeneration and network reach extension in long-haul deployments.
Technical Specifications Optical Performance
Amplifier Type: Booster DWDM high power
Wavelength Range: 1528–1565 nm (C-band)
Input Signal: Multichannel (DWDM)
Small Signal Gain (minimum): 20 dB
Saturated Output Power (minimum): 21 dBm
Noise Figure (maximum): 5.5 dB
Input Isolation: 40 dB (minimum)
Output Isolation: 40 dB (minimum) Optical Interface
Connector Options: FC/PC, FC/APC, SC/PC, SC/APC Physical & Environmental
Packaging: Benchtop or rack-mountable unit
Operating Temperature: 0 to 50 °C
Storage Temperature: −40 to 70 °C
Humidity: Maximum 95% RH non-condensing (0 to 45 °C) Power & Safety Specifications guaranteed at 1550 nm and 23 °C. Maximum output power limited to 22.8 dBm for L-band and 24.5 dBm for C+L-band configurations per FDA 21CFR 1040.10 Class IIIb laser requirements.
Key Features
High saturated output power enables booster deployment in point-to-point and metro ring topologies
Multichannel DWDM capability supports dense wavelength division multiplexing across C-band
Low noise figure minimizes signal degradation in cascade configurations
Dual input/output isolation provides immunity from reflected signals
Multiple connector options accommodate diverse field installations
Wide operating temperature range suits both indoor and outdoor cabinet deployments
Typical Applications
Long-haul terrestrial optical networks requiring signal boost
DWDM system booster amplification stages
Network reach extension in 10 Gbps and higher rate systems
Point-to-point transmission links
Compatibility & Integration FC/PC, FC/APC, SC/PC, and SC/APC connectors enable integration with standard DWDM multiplexers, transponders, and transmission line equipment. The unit operates across 0–50 °C, accommodating standard telecommunications cabinet environments.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | 21 dBm (saturated output, minimum) | Wavelength Range: 1528–1565 nm |
JDS Uniphase OAB1558+22FA0 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase OAB1558+22FA0. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase OAB1558+22FA0 faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
JDS Uniphase OAB1558+22FA0 price
This JDS Uniphase OAB1558+22FA0 is listed at $5,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase OAB1558+22FA0 calibration cost
NIST-traceable calibration for the JDS Uniphase OAB1558+22FA0 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
