JDS Uniphase OAB1562+20FA0
JDS Uniphase Optical Amplifiers. Model: OAB1562+20FA0.
- Model
- JDS Uniphase OAB1562+20FA0
- Calibration
- Available on request
- Price
- $6,200
- Status
- In stock
- RFQ ref
- OAB1562+20FA0
This unit
The JDS Uniphase OAB1562+20FA0 is a benchtop Erbium-Doped Fiber Amplifier (EDFA) engineered for high-gain signal amplification across C-band, L-band, and C+L-band wavelengths in fiber optic communication systems. Operating from 1528 nm to 1610 nm, this unit amplifies single-channel and multichannel DWDM signals while maintaining low noise figure and high saturated output power across pre-amplifier, booster, and in-line configurations. The amplifier extends transmission distance and enhances signal integrity in demanding OEM manufacturing and R&D applications.
Technical Specifications Operating Wavelength Range: 1528–1610 nm (configuration-dependent) Amplifier Configurations: Pre-amplifier, Booster, In-line Amplifier Optical Bands:
C-band: 1528–1565 nm
L-band: 1540–1560 nm
C+L-band: 1528–1610 nm Input Signal Support: Single channel and multichannel DWDM Saturated Output Power (Minimum):
Pre-amp (C-band): 14 dBm
Booster (C-band): 17 dBm
Booster (C+L-band): 20 dBm
Booster (DWDM High Power): 24 dBm
In-line (C-band): 17 dBm
Mid-span Booster (C-band): 21 dBm Noise Figure (Maximum):
Pre-amp (C-band): 3.3 dB
Booster (C-band): 4.5 dB
Booster (C+L-band): 5 dB
Booster (DWDM High Power): 5 dB
In-line (C-band): 3.8 dB
Mid-span Booster (C-band): 5.5 dB Small Signal Gain: 37 dB (Pre-amp, C-band); additional values vary by configuration Guaranteed Measurement Conditions: Typically 1550 nm or 1590 nm at 23 °C Warm-up Time: 10–20 minutes for full specification compliance
Key Features
Front-panel LCD display for input/output power and current monitoring
AC mains power operation
Compact benchtop form factor with rack-mount options available
Optimized gain, noise figure, and saturated output power across all band configurations
Typical Applications
Long-haul and metro fiber optic communication systems
DWDM system deployment and signal boost stages
Component-level OEM manufacturing
Optical communications research and development
Compatibility & Integration Standard fiber optic interfaces support integration into existing C-band, L-band, and C+L-band optical systems. Front-panel controls enable manual current adjustment and real-time power level monitoring.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | 14 dBm to 24 dBm (saturated output power, configuration-dependent) | Wavelength Range: 1528 nm to 1610 nm |
JDS Uniphase OAB1562+20FA0 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase OAB1562+20FA0. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase OAB1562+20FA0 faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
JDS Uniphase OAB1562+20FA0 price
This JDS Uniphase OAB1562+20FA0 is listed at $6,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase OAB1562+20FA0 calibration cost
NIST-traceable calibration for the JDS Uniphase OAB1562+20FA0 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
