Curtiss-Wright / DY-4 SVME-183-1712 Single-Board Computer
Curtiss-Wright / DY-4 Embedded Test Systems.
- Model
- Curtiss-Wright / DY-4 SVME-183-1712
- Calibration
- Available on request
- Price
- $3,400
- Status
- In stock
- RFQ ref
- SVME-183-1712
This unit
The Curtiss-Wright/DY-4 SVME-183-1712 is a single-board computer engineered for deployment in tactical aircraft, armored vehicles, and naval systems operating in harsh environments. Built on dual Motorola MPC7447A/7448 PowerPC processors with AltiVec SIMD capability, it delivers computing for complex signal processing and data-intensive workloads while maintaining compact form factor and exceptional thermal management.
Technical Specifications Processing & Memory
Dual Motorola MPC7447A/7448 PowerPC processors with AltiVec technology
Clock speeds up to 1.4 GHz (single processor); dual MPC7448 at 1.2 GHz
Up to 2 GB DDR SDRAM with ECC; 1 GB and 512 MB configurations available
Hardware-enforced cache coherency for PCI and bus mastering peripherals
128 MB to 512 MB contiguous direct-mapped Flash; 256 MB standard Interfaces & Connectivity
Three Gigabit Ethernet ports (ENETP0, ENETP2)
Six serial ports: 2× RS-232, 3× RS-232, 2× RS-232/433/485
Up to two MIL-STD-1553 channels
Optional 8-bit or 16-bit SCSI interface
Two USB 2.0 ports
Tundra Universe II VME64 master/slave with VME DMA and VME64x geographic addressing
Optional dual SATA 1.0 interfaces Expansion
Two 64-bit PMC sites: PCI Bus 1 (100 MHz PCI-X, 800 MB/s peak) and PCI Bus 2 (66 MHz PCI-X) Timers, Sensors & Clocking
4× 32-bit general-purpose user timers
6× 32-bit OS timers (3 per processor)
2× avionics-style watchdog timers
4× general-purpose PCI/SDRAM DMA controllers
On-board Real-Time Clock
4× on-board temperature sensors Environmental & Physical
Single 0.8" slot occupancy
Operating range: −40 to +71 °C
Air-cooled (SVME) ruggedization levels 0 and 100; conduction-cooled (DMV) levels 100 and 200
Optimized conduction cooling design
Key Features
Dual PowerPC architecture with vector processing for DSP applications
ECC memory protection and cache coherency enforcement
Multi-protocol serial connectivity supporting MIL-STD-1553
High-speed Ethernet and optional SATA storage
Avionics-grade watchdog timing
Typical Applications Defense systems requiring fault-tolerant processing in extreme thermal and shock environments; airborne command and control; naval combat systems; land vehicle fire control and mission computers.
Compatibility & Integration VME64/VME64x architecture with DMA master capability; PMC mezzanine card expansion via two independent PCI buses; software stack compatible with VxWorks and Linux real-time kernels.
Curtiss-Wright / DY-4 SVME-183-1712 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Curtiss-Wright / DY-4 SVME-183-1712. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Curtiss-Wright / DY-4 SVME-183-1712 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Curtiss-Wright / DY-4 SVME-183-1712 price
This Curtiss-Wright / DY-4 SVME-183-1712 is listed at $3,400. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Curtiss-Wright / DY-4 SVME-183-1712 calibration cost
NIST-traceable calibration for the Curtiss-Wright / DY-4 SVME-183-1712 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
