Advantest TR4154 Tracking Generator, 100 kHz to 3.5 GHz
Advantest TR4154 Tracking Generator, 100 kHz to 3.5 GHz,Tracking generator for swept measurements up to 3.5 GHz, used with spectrum analyzers for scalar network analysis.
- Model
- Advantest TR4154
- Calibration
- Available on request
- Price
- $3,979
- Status
- In stock
- RFQ ref
- TR4154
This unit
The Advantest TR4154 Tracking Generator operates from 100 kHz to 3.5 GHz and functions as a specialized instrument for swept measurements in conjunction with Advantest spectrum analyzers. It generates a signal that precisely tracks the analyzer's frequency, enabling scalar network analysis and frequency response characterization with wide dynamic range. The instrument's internal normalize function eliminates measurement errors introduced by the test setup, including cables and auxiliary devices, delivering more accurate results across device and system characterization applications.
Technical Specifications
- Frequency Range: 100 kHz to 3.5 GHz
- Dynamic Range: 80 dB on CRT display; approximately 110 dB achievable by adjusting reference level
- Measurement Type: Scalar network analysis and frequency response measurements
- Operating Temperature: 0°C to +40°C
- Storage Temperature: -20°C to +70°C
- Power: AC mains with user-selectable voltage settings (100 V, 120 V, 220 V, 240 V) via replaceable card
Key Features
- Tracks spectrum analyzer frequency with precision for synchronized swept measurements
- Internal normalize function corrects for system-induced measurement errors
- Modular power supply design accommodates global voltage standards
- Fuse protection with region-specific ratings matching selected voltage setting
Typical Applications
- Filter and amplifier frequency response characterization
- Component and device scalar network analysis
- Transmission and insertion loss measurements across microwave frequencies
- Test setup calibration and error correction
Compatibility & Integration The TR4154 integrates with Advantest spectrum analyzers including the TR4135, R4131 Series, and R4136. Three dedicated connectors synchronize operation: SLOPE, 1st LO INPUT, and 2nd LO INPUT connect directly to corresponding analyzer ports. RF output connects to the analyzer input. GPIB connectivity enables remote control and data transfer. Power connection uses a 3-pin AC LINE connector with ground terminal; regional adapters may be required.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz to 3.5 GHz | Voltage / Current Range: 100 V, 120 V, 220 V, 240 VAC (user-selectable) |
Advantest TR4154 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Advantest TR4154. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Advantest TR4154 faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Advantest TR4154 price
This Advantest TR4154 is listed at $3,979. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Advantest TR4154 calibration cost
NIST-traceable calibration for the Advantest TR4154 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
