Abaco Systems / VMIC VMIVME-1111-040 64-Bit High-Voltage Digital Input Board
Abaco Systems / VMIC Digital Input Board. Model: VMIVME-1111-040.
- Model
- Abaco Systems / VMIC VMIVME-1111-040
- Calibration
- Available on request
- Price
- $5,499
- Status
- In stock
- RFQ ref
- VMIVME-1111-040
This unit
The Abaco Systems / VMIC VMIVME-1111-040 is a 64-bit high-voltage digital input board for VMEbus systems. It has 64 input channels with user-selectable voltage thresholds spanning 1.25 VDC to 66 VDC, supporting multiple signal types including contact closure, voltage source, current sinking, and differential signals. Each 32-input group is jumper-configurable for the desired signal type.
The board transfers data in 8, 16, or 32-bit formats and features buffered inputs with debounce conditioning. Differential line receivers offer RS-422/RS-485 compatibility with ±7V noise immunity. On-board Built-in-Test logic enables fault detection and isolation, while a front-panel Fail LED provides visual status indication.
Open-circuit behavior defaults to logic zero with jumper-selectable logic one override. An input filter option is available for enhanced signal integrity.
Technical Specifications
- Form Factor: Double Eurocard, VMEbus
- Input Channels: 64 total (two groups of 32)
- Data Transfer Width: 8, 16, or 32 bits
- Input Voltage Range: 1.25 VDC to 66 VDC
- User-selectable Thresholds: 1.25 V to 66 V
- Signal Types (per 32-input group): Contact closure, voltage source, current sinking, differential signals
- Differential Line Receivers: RS-422/RS-485-compatible, ±7V noise immunity
- Input Conditioning: Buffered with debounce; input filter option available
- Built-in-Test: On-board BIT logic for fault detection and isolation
- Open-Circuit State: Logic zero (default) or jumper-selectable logic one
- Status Indicator: Front-panel Fail LED
Key Features
- Flexible signal conditioning supports four input signal types with per-group jumper selection
- Wide voltage threshold range accommodates industrial and aerospace signal levels
- Differential line receiver architecture reduces susceptibility to EMI
- Integrated BIT capability streamlines fault isolation during system verification
- Configurable open-circuit behavior adapts to system fail-safe requirements
Typical Applications
- High-voltage industrial control and monitoring systems
- Aerospace and defense vehicle data acquisition
- Process automation with mixed signal inputs
- Real-time fault detection and system diagnostics
Compatibility & Integration Complies with VMEbus specification ANSI/IEEE STD 1014-1987, IEC 821, and 297. Direct drop-in replacement for the legacy GE / Abaco VMIVME-1111.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 1.25 VDC to 66 VDC |
Abaco Systems / VMIC VMIVME-1111-040 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-1111-040. Calibration covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / VMIC VMIVME-1111-040 faults: ESD-damaged input protection, failed driver ICs, connector pin damage. Most failures involve ESD-damaged input protection circuitry, failed logic driver ICs, or mechanical connector pin damage. Board-level component replacement is standard practice.
Abaco Systems / VMIC VMIVME-1111-040 price
This Abaco Systems / VMIC VMIVME-1111-040 is listed at $5,499. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-1111-040 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-1111-040 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
