Abaco Systems / VMIC VMIVME-4514A-000 16-Channel Scanning Analog I/O Board
Abaco Systems / VMIC Data Acquisition Systems (DAQ). Voltage / Current Range: ±10 V (bipolar); 0 to +5 V, ±2.5 V, ±5 V, 0 to +10 V (unipolar); ±10 mA output current, Current: limiting input resistors provide overvoltage prote, Current: ±10 mA at ±10 V per channel.
- Model
- Abaco Systems / VMIC VMIVME-4514A-000
- Calibration
- Available on request
- Price
- $3,599
- Status
- In stock
- RFQ ref
- VMIVME-4514A-000
This unit
The Abaco Systems / VMIC VMIVME-4514A-000 is a 16-channel scanning analog I/O board for VMEbus systems, delivering simultaneous data acquisition and control with 12-bit resolution on both input and output channels. The board supports differential and single-ended input configurations with programmable voltage ranges, on-board multiplexing for channel scanning, and individual sample-and-hold amplifiers on each output. Throughput reaches 33 kHz with flexible ADC operating modes including random polling, scanning poll, and auto scanning.
Technical Specifications
Analog Inputs- 16 channels, 12-bit resolution
- Differential or pseudo-differential input capability
- Programmable ranges: ±2.5 V, ±5 V, ±10 V (bipolar) or 0 to +5 V, 0 to +10 V (unipolar)
- Optional 36 Hz single-pole input filter
- On-board multiplexers for automated channel scanning
- Current-limiting input resistors provide overvoltage protection
- 16-word dual-port memory stores complete scan cycle data
- ADC operating modes: Random Polling, Scanning Poll, Auto Scanning Analog Outputs
- 16 channels, 12-bit resolution
- Individual sample-and-hold amplifier per channel
- Output current: ±10 mA at ±10 V per channel
- Programmable ranges: ±2.5 V, ±5 V, ±10 V (bipolar) or 0 to +5 V, 0 to +10 V (unipolar)
- Off-line testing capability with output isolation from I/O connector Performance
- Throughput: 33 kHz (1.7 mS per scan cycle)
- 16 MHz system clock drives microsecond timer for ADC control
- Short settling control mode available to increase throughput
Key Features
- Dual-port memory architecture allows VME access to latest scan data without interrupting acquisition
- Programmable gain on input channels
- Built-in test functionality verifies active component operation
- P2 I/O connector interface
Typical Applications Data acquisition systems, real-time control platforms, and instrumentation requiring simultaneous multichannel analog monitoring and command output in VMEbus environments.
Compatibility & Integration Standard VMEbus interface for direct integration into VME-based architectures. Supports both bipolar and unipolar signal conditioning with field-configurable gain and range settings.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | ±10 V (bipolar) |
Abaco Systems / VMIC VMIVME-4514A-000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-4514A-000. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / VMIC VMIVME-4514A-000 price
This Abaco Systems / VMIC VMIVME-4514A-000 is listed at $3,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-4514A-000 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-4514A-000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
