Astronics / EADS / Racal 1260-700 Prototyping I/O Plug-In Module
Astronics / EADS / Racal VXI Modules. Model: 1260-700.
- Model
- Astronics / EADS / Racal 1260-700
- Calibration
- Available on request
- Price
- $650
- Status
- In stock
- RFQ ref
- 1260-700
This unit
The Astronics/EADS/Racal 1260-700 is a prototyping I/O plug-in module for the Adapt-a-Switch platform, enabling rapid custom circuit development and testing. It has 88 bidirectional TTL I/O lines, individually configurable as inputs or outputs in 8-bit port groups. The module supports asynchronous, synchronous, and mixed synchronous operating modes with two-wire programmable handshaking (active high or active low). Data rate on VXIbus systems reaches 200 kHz.
Technical Specifications
Digital I/O: 88 TTL lines, configurable per 8-bit port
Operating Modes: Asynchronous, synchronous, and mixed synchronous
Handshaking: Two-wire programmable, selectable active high/low
Data Rate (VXIbus): 200 kHz
Power Supply: Fused +5 VDC; when in carrier, fused +12 V and +24 V available
Prototyping Area: 0.1 × 0.1-inch grid card with ground bus and two uncommitted buses (jumper-configurable to internal or external supply)
Key Features
Open-architecture design permits substitution of custom plug-in boards for specialized applications (ADCs, DACs, switch cards)
Individual port-level I/O configuration without module redesign
Two uncommitted buses support flexible breadboarding and power routing
Blank front panel with options for 64-pin IDC or 160-pin DIN connector cutouts
Includes prototyping kit with card, interface connector, and panel hardware
Typical Applications
Custom signal conditioning and routing
Prototype analog-to-digital and digital-to-analog conversion stages
User-defined switching matrices and test point multiplexing
Flexible I/O expansion in modular test systems
Compatibility & Integration The 1260-700 integrates with the Adapt-a-Switch VXIbus Carrier (Model 1260-100) or the 1256 GPIB Switching Mainframe. VXIplug&play framework support includes drivers for LabWindows/CVI and LabVIEW on Windows 95/98/ME/NT/2000/XP. Operating altitude to 10,000 ft; non-operating to 15,000 ft.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+12 V, +24 V (in carrier), +5 VDC |
Astronics / EADS / Racal 1260-700 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Astronics / EADS / Racal 1260-700. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Astronics / EADS / Racal 1260-700 faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Astronics / EADS / Racal 1260-700 price
This Astronics / EADS / Racal 1260-700 is listed at $650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Astronics / EADS / Racal 1260-700 calibration cost
NIST-traceable calibration for the Astronics / EADS / Racal 1260-700 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
