DDC IAC-37001 Synchro/Resolver Module

The DDC IAC-37001 is a VXI C-size register-based module that combines independent synchro/resolver angle generation and measurement in a single card. It converts synchro or resolver signals into high-resolution digital data and generates precision synchro/resolver outputs, delivering the accuracy and isolation required in aerospace and industrial control systems. ## Technical Specifications Measurement Section • Resolution: 20 or 16 bits (programmable) • Accuracy: 18 arc seconds (20-bit); 36 arc seconds (16-bit) • Angular Range: 0–360 degrees • Reference Input: Transformer isolated, 11.8/26/90 V line-to-line, 360–5000 Hz, ±50° phase shift maximum, 150 kΩ minimum impedance, 500 V breakdown voltage • Signal Input: Transformer isolated, 11.8/26/90 V line-to-line, 360–5000 Hz, ±50° phase shift maximum, 150 kΩ minimum impedance, 500 V breakdown voltage Generation Section • Resolution: 16 bits • Accuracy: ±25 arc seconds (no load); ±36 arc seconds (1.5 VA load) • Angular Range: 0–360 degrees • Reference Input: Transformer isolated, 11.8/26/90 V line-to-line • Signal Output: Transformer isolated, 11.8/26/90 V line-to-line, 1.5 VA load capacity, ±3.5° phase shift maximum, ±0.15 Ω output impedance, 500 V breakdown voltage • Dynamic Rotation: Programmable clockwise or counter-clockwise angular rotation via internal data rate control ## Key Features • Dual independent measurement and generation channels • Transformer isolation on all synchro/resolver interfaces • Programmable resolution (16/20-bit measurement) • Selectable voltage levels (11.8, 26, 90 V) • Mode selection: synchro or resolver operation • Internal/external rate signal configuration for dynamic rotation • Wrap-around self-test capability • Full 360° measurement and generation range ## Typical Applications • Aircraft attitude and heading reference systems • Rotating machinery position feedback and control • Precision angle encoder interfaces • Synchro-to-digital conversion in legacy avionic systems • Multi-axis position simulation and test ## Compatibility & Integration The IAC-37001 integrates into standard VXI C-size slot architecture. All signal inputs and outputs employ transformer isolation to prevent ground loops and ensure noise immunity in high-voltage industrial environments. Programmable self-test simplifies system validation.