Anritsu 68037C Synthesized CW Generator, 2 – 20 GHz
Anritsu 68037C,Generates CW signals from 2 to 20 GHz with minimal phase noise and high output accuracy. Suitable for RF/microwave component validation, research, and high-end manufacturing testing.
- Model
- Anritsu 68037C
- Calibration
- Available on request
- Price
- $3,479
- Status
- In stock
- RFQ ref
- 68037C
This unit
The Anritsu 68037C Synthesized CW Generator delivers continuous wave signals across 2–20 GHz with ultra-low phase noise and precise output power leveling. Built for RF and microwave validation, R&D, and automated test environments, it combines configurable architecture with straightforward local oscillator replacement capability or advanced signal generation for demanding applications.
Technical Specifications
Frequency and Output- Frequency range: 2 GHz to 20 GHz
- Output power: +17 dBm maximum, –125 dBm minimum
- Output accuracy: Leveled power to +17 dBm up to 20 GHz
- Frequency resolution: 1 kHz standard; 0.1 Hz optional (Option 11) Signal Purity
- Phase noise: –107 dBc at 10 kHz offset from 10 GHz
- Spurious signals: Ultra-low levels Modulation and Sweep
- Modulation: Internal AM, FM, phase modulation (øM), and pulse modulation; user-downloaded arbitrary modulation supported
- Internal pulse generator: Doublet, triplet, or quadruplet pulses for RADAR blind spot testing
- Sweep modes: CW, step sweep, digital frequency sweep, digital power sweep, alternate sweep, and manual sweep
- Step sweep dwell time: 1 ms/step to 99 seconds/step (starts after phase lock)
- Switching time: <5 ms for <100 MHz steps; <15 ms + 1 ms/GHz for larger steps or <40 ms maximum Control and Integration
- List mode: Internal execution reduces ATE controller overhead
- Programmability: Optional SCPI compatibility with IVICOM and LabVIEW drivers
- Form factor: Rackmount
Key Features
- Exceptional phase noise performance at –107 dBc (10 kHz offset)
- Fast frequency switching <5 ms for narrow bandwidths
- Flexible dwell times from 1 ms to 99 seconds per step
- Pulse modulation with multi-pulse generation for radar applications
- List mode operation for autonomous signal sequencing
Typical Applications Component validation, RF receiver testing, local oscillator replacement, automated test equipment integration, and radar system characterization.
Compatibility & Integration Optional SCPI commands enable direct ATE integration. Available drivers include IVICOM and National Instruments LabVIEW. Option 2A adds 10 dB/step attenuation; Option 11 enables 0.1 Hz resolution.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2 GHz to 20 GHz | Power Range (dBm): '+17 dBm to –125 dBm |
Anritsu 68037C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 68037C. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 68037C faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 68037C price
This Anritsu 68037C is listed at $3,479. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 68037C calibration cost
NIST-traceable calibration for the Anritsu 68037C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
