Anritsu 69097B Ultra Low Noise Synthesized CW Generator, 0.01 – 65 GHz
Anritsu 69097B,"Ultra low noise CW generator spanning 0.01 to 65 GHz. Engineered for clean signal generation in sensitive radar and communication systems."
- Model
- Anritsu 69097B
- Calibration
- Available on request
- Price
- $36,570
- Status
- In stock
- RFQ ref
- 69097B
This unit
The Anritsu 69097B is a synthesized CW generator delivering ultra-low phase noise across 0.01 GHz to 65 GHz. Purpose-built for radar, communication systems, and precision laboratory testing, it combines exceptional SSB phase noise performance with spurious signal suppression required for sensitive measurements. The instrument features fast phase-locked step switching, leveled output down to –120 dBm in 0.01 dB resolution, and optional frequency stability to 5 × 10⁻¹⁰/day with aging.
Its compact 13.3 cm height fits A.T.E. rack configurations while maintaining full frequency and power sweep capabilities across the entire band.
Technical Specifications
Frequency- Range: 0.01 GHz to 65 GHz
- Optional extension: Down to 0.1 Hz
- Resolution: 100.0 mHz standard; 0.1 Hz optional
- Frequency stability (internal time base): <2 × 10⁻⁸/day aging; <2 × 10⁻⁸/°C temperature
- Option 16 stability: <5 × 10⁻¹⁰/day aging; <2 × 10⁻¹⁰/°C temperature Output Power
- Range: +12 dBm to –15 dBm typical (–20 dBm extended)
- Leveled minimum: –15 dBm standard; –120 dBm with attenuator
- Resolution: 0.01 dB logarithmic
- Output impedance: 50 Ohms
- Guaranteed leveled power: +17 dBm to 20 GHz; +2.5 dBm to 40 GHz; +6 dBm to 40 GHz Noise & Spurious
- SSB phase noise: –78 dBc to –131 dBc at 10 GHz carrier (offset dependent)
- Spurious signals: Ultra-low performance Sweep Modes
- Digital frequency and power sweep with manual stepped or phase-locked modes
- List sweep: Up to 2000 non-sequential frequency/power sets
- Phase-locked step width: 1 kHz to full range (0.1 Hz optional)
- Switching time: <5 ms for steps <100 MHz
Key Features
- Synthesized CW generation with phase-locked frequency adjustment
- Configurable platform within 69000B series architecture
- 0.01 dB output power resolution for precise level control
- Fast 5 ms switching enables rapid frequency/power stepping
Typical Applications
- Radar system development and testing
- Communication system characterization
- Phase noise sensitive measurement campaigns
- Multi-frequency signal generation for component evaluation
Compatibility & Integration Part of the Anritsu 69000B modular generator series supporting tailored configurations from basic CW to full-featured synthesis with sweep automation.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 GHz to 65 GHz | Power Range (dBm): '+12 dBm to –15 dBm typical |
Anritsu 69097B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69097B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69097B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69097B price
This Anritsu 69097B is listed at $36,570. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69097B calibration cost
NIST-traceable calibration for the Anritsu 69097B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
