Anritsu 69153A Synthesized Sweep Generator, 2 – 26.5 GHz
Anritsu 69153A,"Generates clean signals from 2 to 26.5 GHz. Designed for high-frequency testing in radar and wireless applications with precision control."
- Model
- Anritsu 69153A
- Calibration
- Available on request
- Price
- $21,570
- Status
- In stock
- RFQ ref
- 69153A
This unit
The Anritsu 69153A is a synthesized sweep generator delivering clean, precise signals across 2–26.5 GHz for demanding RF and microwave test applications. Built on synthesized architecture, it combines excellent spectral purity with frequency stability, making it ideal for radar systems, wireless communications, and sensitive high-frequency measurements requiring accurate signal generation and control.
Technical Specifications
Frequency Range: 2 GHz to 26.5 GHz Output Power- Maximum: +9 dBm
- Minimum: −15 dBm
- Resolution: 0.01 dB
- Accuracy: ±2 dB or ±2.5 dB
- Level Switching Time: 20 ms Signal Quality
- Output Impedance: 50 Ohm
- SSB Phase Noise: −105 dBc/Hz (minimum) to −63 dBc/Hz (maximum)
- Harmonics: −40 dBc
- Non-harmonics: −40 dBc
Key Features
- Ultra low-noise synthesized architecture for spectral purity and stability
- 0.01 dB power resolution across full output range
- Fast 20 ms level switching for dynamic test sequences
- Sweep capabilities with independently selectable sweep width
- User-accessible level flatness correction
- Self-test functionality
- Master/slave operation modes
Typical Applications
- Radar system design and verification
- Wireless communication receiver testing
- High-frequency component characterization
- Sensitive measurement applications requiring low phase noise
- Complex system integration and validation
Compatibility & Integration The 69153A integrates into standard RF test benches via its 50 Ohm output impedance, matching industry-standard test equipment. GPIB control enables remote automation and integration with automatic test equipment (ATE) systems.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2 GHz to 26.5 GHz | Power Range (dBm): '+9 dBm to −15 dBm |
Anritsu 69153A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69153A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69153A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69153A price
This Anritsu 69153A is listed at $21,570. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69153A calibration cost
NIST-traceable calibration for the Anritsu 69153A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
