Anritsu 69395A Synthesized Sweep/Signal Generator, 0.5 – 65 GHz
Anritsu 69395A Synthesized Sweep/Signal Generator, 0.5 – 65 GHz, offers wide frequency coverage and high output power stability. Its flexibility and accuracy suit a variety of RF and microwave applications including radar and satellite communications.
- Model
- Anritsu 69395A
- Calibration
- Available on request
- Price
- $36,730
- Status
- In stock
- RFQ ref
- 69395A
This unit
The Anritsu 69395A is a synthesized sweep/signal generator delivering wide-band RF and microwave signal generation from 0.5 GHz to 65 GHz. Built for precision applications including radar, satellite communications, and component characterization, it combines stable output power with ultra-low phase noise and flexible modulation capabilities. The instrument supports analog, step, and manual sweep modes alongside programmable frequency agility for rapid signal sequencing in automated test environments.
Technical Specifications
- Frequency Range: 0.5 GHz to 65 GHz
- Output Power: +17 dBm maximum; -125 dBm minimum
- Phase Noise: -100 dBc/Hz SSB at 10 kHz offset from 10 GHz
- Frequency Resolution: 0.1 Hz (optional)
- Modulation: Internal AM, FM, phase modulation, and pulse modulation; 7 internal waveforms including Gaussian noise; user-downloadable complex modulation
Key Features
- Sweep Modes: Analog, step, and manual sweep with alternate sweep capability - sequencing between two independent frequency ranges at different power levels in single operation
- Frequency Agility: Programmable access to up to 1000 non-sequential frequencies via GPIB control
- Interface: GPIB, USB, and LAN connectivity for remote control and automated integration
- Display: High-resolution interface for direct instrument operation
- Power Options: AC adapter and battery operation supported
Typical Applications
- Local oscillator replacement in receiver chains requiring low-noise, low-spurious performance
- Signal simulation and modulation testing across X-, Ku-, and Ka-band frequencies
- Automated test equipment integration for high-volume RF component screening
- Radar and satellite system characterization
- Broadband component analysis and device linearization
Compatibility & Integration Optional Wiltron 360B VNA compatibility configuration modifies rack-mounting hardware for seamless integration into existing test benches.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.5 GHz to 65 GHz | Power Range (dBm): '-125 dBm to +17 dBm |
Anritsu 69395A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69395A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69395A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69395A price
This Anritsu 69395A is listed at $36,730. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69395A calibration cost
NIST-traceable calibration for the Anritsu 69395A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
