HP / Agilent 83620A Synthesized Sweeper, 10 MHz to 20 GHz

The HP / Agilent 83620A is a synthesized sweeper that delivers high performance and versatile signal generation from 10 MHz to 20 GHz. It combines the functionality of a synthesizer, sweeper, and modulator in a single instrument. Ideal for testing components, devices, and systems in various applications.

Model
HP / Agilent 83620A
Calibration
Available on request
Price
$6,444
Status
In stock
RFQ ref
83620A
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The HP/Agilent 83620A Synthesized Sweeper is a signal generation instrument covering 10 MHz to 20 GHz, designed for RF and microwave component, device, and system testing. It combines synthesizer, sweeper, and modulation functions in a single unit. The instrument delivers precise frequency control through indirect synthesis with 1 kHz standard resolution (1 Hz optional), maximum leveled RF output of +13 dBm, and phase noise of −70 dBc at 20 GHz with 10 kHz offset.


Harmonics are suppressed to at least 50 dB below the carrier from 2.0 to 20 GHz.


Technical Specifications



  • Frequency Range: 10 MHz to 20 GHz

  • Frequency Resolution: 1 kHz standard; 1 Hz optional (Opt 008)

  • Maximum Leveled RF Output: +13 dBm

  • RF Output Power Range (with Opt 001): +20 dBm to −110 dBm

  • Power Sweep Range: −20 dBm to maximum power

  • Phase Noise (20 GHz, 10 kHz offset): −70 dBc

  • Harmonic Suppression: ≥50 dB below carrier, 2.0 to 20 GHz

  • RF Output Connector: 3.5 mm


Key Features



  • Sweep Modes: Step, List, Ramp

  • Modulation: Amplitude modulation (AM) with linear and scan modes, frequency modulation (FM) to ±8 MHz deviation at rates up to 8 MHz, pulse modulation with on/off ratio exceeding 80 dB and rise/fall times below 25 ns (10 ns with Opt 006)

  • Pulse Performance: Minimum internally leveled RF pulse width <1 µs; minimum RF pulse width <50 ns (15 ns with Opt 006)

  • User Flatness Correction: Enables accurate leveling at remote test points

  • Fixed and Swept Frequency Offset: Supports two-tone measurement


Modulation Capabilities



  • AM with modulation depth to 99.7%, 3 dB bandwidth 100 kHz

  • FM with rates to 8 MHz, maximum deviation ±8 MHz

  • Scan modulation for antenna pattern simulation


Available Options Step attenuator (Opt 001), internal modulation generator (Opt 002), fast pulse modulation (Opt 006), 1 Hz frequency resolution (Opt 008), rear panel RF output (Opt 004), network analyzer interface (Opt H69), frequency limit to 2 GHz (Opt H80), and rack mount kit (Opt 908).

Specifications

ParameterValue
Frequency Range10 MHz to 20 GHz | Power Range (dBm): '+20 dBm to −110 dBm | Voltage / Current Range: F 5A/250V

HP / Agilent 83620A — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 83620A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Common HP / Agilent 83620A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.

HP / Agilent 83620A price

This HP / Agilent 83620A is listed at $6,443.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

HP / Agilent 83620A calibration cost

NIST-traceable calibration for the HP / Agilent 83620A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →

Documents