Agilent/Keysight 8712C
The Agilent/Keysight 8712C is a vector network analyzer that delivers reliable and accurate measurements for RF component and system testing. With a frequency range of 300 kHz to 1.3 GHz, it offers comprehensive analysis capabilities, including S-parameter measurements, time-domain analysis, and frequency-domain analysis.
- Model
- HP 8712C
- Calibration
- Available on request
- Price
- $6,500
- RFQ ref
- 8712C
This unit
The Agilent/Keysight 8712C is a vector network analyzer spanning 300 kHz to 1.3 GHz, designed for RF component characterization and system-level testing. This single-unit instrument integrates a synthesized RF source, transmission/reflection test set, dual-channel receivers, and CRT display to deliver S-parameter, impedance, and SWR measurements in production and lab environments.
Technical Specifications
Frequency Performance- Operating Range: 300 kHz to 1.3 GHz
- Source Frequency Resolution: 1 Hz
- Output Power: Up to +16 dBm
- Sweep Time: 50 ms or faster Receiver Dynamic Range
- Narrowband Measurement Mode: Greater than 100 dB
- Narrowband Transmission (250 Hz BW, 16 averages): Up to 115 dB typical
- Broadband Transmission (6500 Hz BW): Up to 57 dB typical
- Trace Noise (Narrowband Magnitude): ±0.05 dB peak-to-peak typical Display & User Interface
- Integrated CRT display with two independent measurement channels
- User-selectable formats: rectangular, polar, Smith chart
- VGA output for external monitor
- Front panel hardkeys and softkey menus Power & Physical
- Input Voltage: 115 V or 230 V nominal
- Power Consumption: 230 W nominal
- Dimensions: 179 × 425 × 514 mm
- Weight: 40 kg
Key Features
- S-parameter measurements with time and frequency-domain analysis
- Complex impedance and standing wave ratio (SWR) quantification
- Loss characterization including insertion loss and return loss
- Structural return loss and fault location (Option 100)
- AM delay and group delay measurements (Option 1DA/1DB)
- Internal 3.5-inch disk drive (LIF/DOS formats)
- TCP/IP Ethertwist LAN connectivity (Option 1F7)
- 60 dB step attenuator option (Option 1E1)
- 75 Ω system impedance capability (Option 1EC)
Typical Applications Component characterization, transmission line analysis, antenna measurements, filter evaluation, and impedance matching verification across LF through microwave frequencies.
Compatibility & Integration GPIB automation support, VGA external monitor interface, and internal BASIC programming capability (Option 1C2) enable integration into automated test systems and production workflows.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 300 kHz to 1.3 GHz |
| Power Range (dBm) | up to +16 dBm |
| Voltage / Current Range | 115 V nominal, 230 V nominal |
HP 8712C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP 8712C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP 8712C price
This HP 8712C is listed at $6,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP 8712C calibration cost
NIST-traceable calibration for the HP 8712C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
