Fluke 87V-MAX True RMS Digital Multimeter with built-in thermometer
Fluke Laboratory Measurement Instruments. Voltage: 0–1000 V, Current: 0–10 A continuous (20 A for 30 seconds).
- Model
- Fluke 87V-MAX
- Calibration
- Available on request
- Price
- $570
- Status
- In stock
- RFQ ref
- 87V-MAX
This unit
The Fluke 87V-MAX is a True RMS digital multimeter engineered for industrial field service and troubleshooting in harsh environments. It delivers accurate measurements across AC/DC voltage, current, resistance, capacitance, frequency, and temperature - plus specialized VFD measurement capability for electrically noisy equipment. Built to survive extreme conditions with IP67 rating, 4 m drop protection, and CAT IV 600 V / CAT III 1000 V safety certification, this meter combines durability with precision measurement.
Technical Specifications Electrical Measurements
AC/DC Voltage: 0–1000 V, 0.05% + 1 DC accuracy, 0.7% + 4 AC accuracy (true-rms), 0.1 mV resolution
AC/DC Current: 0–10 A continuous (20 A for 30 seconds), 0.2% + 2 DC accuracy, 1.0% + 2 AC accuracy, 0.1 μA resolution
Resistance: 0–50 MΩ, 0.1 Ω resolution
Capacitance: 0.01 nF–10,000 μF
Frequency: 0–200 kHz, 0.005% + 1 accuracy, 0.01 Hz resolution
Temperature (via Type-K thermocouple): -200 °C to +1090 °C
Continuity and diode testing included VFD Measurement Low-pass filtered AC voltage measurements (15 Hz to 20 kHz) with high-frequency noise rejection for accurate readings on variable frequency drives and similar electrically noisy circuits. Environmental & Physical
IP67 rating (complete dust and water protection)
Operational: -15 °C to +55 °C; emergency operation at -40 °C (up to 20 minutes)
95% humidity rated
Withstands 4 m (13 ft) drops
Survives 8000 V transient spikes (load switching faults)
CAT IV 600 V / CAT III 1000 V rated
Industrial-strength outer shell with removable holster (doubles as test lead storage and probe holder) Display
Hi-resolution 19,999 or 20,000 count display modes
Key Features
True-RMS AC voltage and current for accurate non-linear signal measurement
Built-in Type-K thermocouple thermometer - no separate device required
VFD-optimized measurements with low-pass filtering and shielding against high-frequency noise
One-handed operation via holster-integrated probe holder
Industrial-grade drop and environmental protection
Typical Applications Electrical troubleshooting on industrial circuits, variable frequency drive diagnostics, HVAC/R service, motor and transformer testing, and field temperature monitoring.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 200 kHz | Voltage / Current Range: 0-10 A (20 A for 30 seconds), 0-1000 V |
Fluke 87V-MAX — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke 87V-MAX. Calibration covers DC voltage accuracy at all ranges, AC voltage (True RMS) accuracy at 50 Hz, 1 kHz, and 10 kHz, DC current accuracy, resistance accuracy at all decade ranges, frequency accuracy, and diode test voltage. Fluke 87V and 289 also include capacitance and temperature calibration.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fluke 87V-MAX faults: blown input fuse, worn input jacks, display segment failure, relay contact wear on bench DMMs. Common faults include worn input jacks (banana socket contact wear on the mA and COM terminals), blown input fuses (especially the 440 mA HRC fuse), and display segment failures. Keithley 2000/2001/2002 bench DMMs commonly develop relay contact wear affecting resistance accuracy after extended service.
Fluke 87V-MAX price
This Fluke 87V-MAX is listed at $570. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke 87V-MAX calibration cost
NIST-traceable calibration for the Fluke 87V-MAX is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers DC voltage accuracy at all ranges, AC voltage (True RMS) accuracy at 50 Hz, 1 kHz, and 10 kHz, DC current accuracy, resistance accuracy at all decade ranges, frequency accuracy, and diode test voltage. Fluke 87V and 289 also include capacitance and temperature calibration.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
