Active Silicon AS-PHX-D24CL-PE1 Camera Link Frame Grabber
The Active Silicon AS-PHX-D24CL-PE1 is a Camera Link frame grabber designed for high-performance image acquisition. It supports a wide range of Camera Link cameras, providing a reliable interface for demanding applications. This frame grabber ensures high-speed data transfer and efficient image processing.
- Model
- Active Silicon AS-PHX-D24CL-PE1
- Calibration
- Available on request
- Price
- $750
- Status
- In stock
- RFQ ref
- AS-PHX-D24CL-PE1
This unit
The Active Silicon AS-PHX-D24CL-PE1 is a PCI Express Camera Link frame grabber for high-speed image acquisition in industrial and scientific imaging systems. Built on PCIe 1.1 x1 architecture with burst rates exceeding 190 Mbytes/sec, this board delivers direct hardware control of image data streaming with zero CPU overhead via scatter-gather DMA and Posted Writes. The board conforms to Camera Link v1.2 specification and accommodates Base Camera Link formats including 8 to 16-bit single-tap, 8-bit RGB, and dual-tap 12-bit camera sources at pixel clock rates up to 85 MHz.
Technical Specifications
- Interface: PCI Express 1.1, single lane (x1)
- PCIe Burst Rate: Exceeds 190 Mbytes/sec (subject to host performance)
- Address Space: 16 Mbytes for address space; 256 bytes for I/O space
- Camera Link Specification: v1.2
- Maximum Pixel Clock: 85 MHz
- Counter Timers: Four 32-bit units
- I/O Opto-Isolated Outputs: Sink up to 20 mA from 24 V supply
- I/O Opto-Isolated Inputs: Sense 3.3 V to 24 V logic high
- Differential Input Ports: Two 2-bit EIA-644 (LVDS) ports
- TTL I/O Ports: Two 8-bit ports
Key Features
- Supports all Base Camera Link tap configurations including line interlaced, line offset, pixel interlaced, and pixel offset formats
- Power over Camera Link (PoCL) with SafePower for camera powering via Camera Link cable
- Hardware scatter-gather DMA engine for efficient data transfer
- FPGA-based processing with Region of Interest and sub-sampling controls
- Look-Up Table functionality for gamma correction, dynamic range cropping, and binary thresholding
- UART with EIA-644 signaling accessible as standard Windows COM port
- Configurable event-driven interrupts for frame/line timing and FIFO status
- DataMapper functionality for acquired data mapping and packing
Compatibility & Integration Supports both Power over Camera Link–enabled and conventional non-PoCL cameras. Optional AS-PHX-ADP-50MD-IO interface adapter provides 50-way mini D connector access to I/O signals. PHX SDK available for development and integration.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 24 V supply |
Active Silicon AS-PHX-D24CL-PE1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Active Silicon AS-PHX-D24CL-PE1. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Active Silicon AS-PHX-D24CL-PE1 price
This Active Silicon AS-PHX-D24CL-PE1 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Active Silicon AS-PHX-D24CL-PE1 calibration cost
NIST-traceable calibration for the Active Silicon AS-PHX-D24CL-PE1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →