DynamicSignals / GaGe CompuGen 3250 High-Speed Digital Output ISA Module

The DynamicSignals/GaGe CompuGen 3250 is a high-speed digital output ISA module designed for generating complex waveforms and patterns. It offers high resolution and speed, making it suitable for various applications such as arbitrary waveform generation, digital pattern simulation, and control systems. The module provides a flexible and precise solution for demanding digital output requirements.

Model
DynamicSignals / GaGe CompuGen 3250
Calibration
Available on request
Price
$1,100
Status
In stock
RFQ ref
CompuGen 3250
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The DynamicSignals/GaGe CompuGen 3250 is a high-speed digital output ISA module that generates complex waveforms and digital patterns with precise timing and flexible control. It delivers 32 bits of parallel digital output clocked up to 50 MHz, supporting arbitrary waveform generation, digital pattern simulation, and hardware-retriggerable burst operations. On-board pattern memory accommodates up to 8 Meg × 32 bits, while selectable internal clocking (50 MHz, 25 MHz, 10 MHz, 5 MHz) and optional external clock input (DC to 50 MHz) enable deterministic signal generation. Multiple output modes - endless looping, multi-shot, and one-shot - combined with internal and external triggering, adapt the module to continuous test scenarios, repetitive pattern sequences, and pulse-echo measurements. TTL/CMOS output levels drive high-impedance loads to 5 V and 50 Ω loads to 3.5 V using four parallel 74FCT162245 drivers for extended current capability.

Technical Specifications

Digital Output: 32 parallel bits with 1 clock output and 1 SYNC signal

Output Voltage: 0–5 V into 1 MΩ; 0–3.5 V into 50 Ω load

Output Logic Levels: TTL/CMOS

Clock Frequency: Internal selectable at 50 MHz, 25 MHz, 10 MHz, or 5 MHz; external input DC to 50 MHz maximum

Maximum Sample Rate: 50 MHz (20 ns per sample)

Memory Depth: 256K to 8M samples (32-bit words)

Timebase Stability: Crystal-controlled on-board oscillator

External Clock Requirements: Minimum 10 ns positive or negative pulse width

Power Consumption: 20 W @ +5 V

Key Features

High-current output drivers for direct load interfacing

Endless looping, multi-shot, and one-shot generation modes

Hardware re-triggerable operation for burst pattern generation

Internal software triggering and external TTL trigger input

Selectable trigger edge (rising or falling)

Typical Applications

Arbitrary waveform generation for complex signal synthesis

Digital pattern simulation and validation

Pulse-echo and radar signal generation

System clock and timing signal generation

Control signal sequencing

Compatibility & Integration

ISA bus interface

68-pin MDR connector (3M p/n 10268-55H3VC)

Specifications

ParameterValue
Frequency RangeDC to 50 MHz | Voltage / Current Range: 0–3.5 V (50 Ω load)

DynamicSignals / GaGe CompuGen 3250 — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the DynamicSignals / GaGe CompuGen 3250. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

DynamicSignals / GaGe CompuGen 3250 price

This DynamicSignals / GaGe CompuGen 3250 is listed at $1,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

DynamicSignals / GaGe CompuGen 3250 calibration cost

NIST-traceable calibration for the DynamicSignals / GaGe CompuGen 3250 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →