Agilent/Keysight DSOX3022G

The Keysight DSOX3022G is a 200 MHz, 2-channel digital storage oscilloscope delivering real-time signal acquisition and analysis for design validation and troubleshooting. This InfiniiVision 3000G X-Series instrument combines a high-speed digitizer with integrated measurement and analysis tools, capture complex signals at up to 5 GSa/s and update waveforms at 1,000,000 wfms/s. An 8.5-inch capacitive touch display provides intuitive navigation, while integrated protocol decoding covers I2C, SPI, UART/RS232/RS485, I2S, and USB PD standards.

Technical Specifications

• Bandwidth: 200 MHz


• Analog channels: 2


• Maximum sample rate: 5 GSa/s (half channels), 2.5 GSa/s (all channels)


• Memory depth: 4 Mpts (half channels), 2 Mpts (all channels)


• Waveform update rate: 1,000,000 wfms/s


• Vertical resolution: 8 bits


• Input impedance: 1 MΩ ± 1% (14 pF), 50 Ω ± 1.5% (selectable)


• Input capacitance: 8 pF


• Rise time: ≤ 1.75 ns


• Display: 8.5-inch capacitive touch screen

Key Features

• 7-in-1 instrument integration: oscilloscope, protocol analyzer, frequency response analyzer (Bode plots), 20 MHz function/arbitrary waveform generator, 3-digit DVM, 8-digit counter/totalizer


• Hardware-based serial protocol decoding and triggering (I2C, SPI, UART/RS232/RS485, I2S, USB PD)


• Zone Touch Trigger for signal-centric navigation


• Built-in 20 MHz waveform generator with arbitrary function capability


• Frequency response analysis (Bode plots) for swept gain and phase measurements


• Waveform and measurement histograms for jitter and noise analysis


• Mask limit and measurement limit testing


• Segmented memory for extended capture periods at elevated sample rates

Typical Applications Serial bus debugging and protocol verification, frequency response characterization, signal integrity analysis, embedded system development, power electronics testing.

Compatibility & Integration

• USB Host: 2 × USB 2.0 ports (front and rear)


• USB Device: 1 × USB 2.0 (rear, USBTMC)


• LAN: 10/100Base-T


• VGA output for external displays


• GPIB: Optional (IEEE 488)


• Trigger output: BNC connector


• PathWave BenchVue Oscilloscope Software included for PC control and offline analysis


• Dimensions: 381 × 204 × 142 mm; Weight: 4.2 kg