Agilent / Keysight E1328A 4-Channel D/A Converter
Agilent / Keysight E1328A,"Offers four independent analog output channels with 16-bit resolution and programmable output ranges. Delivers accurate, low-noise signals suitable for simulation, control, or stimulus generation. Ideal for applications in system control, automation, and test requiring precision analog outputs within a VXI modular test setup or custom signal conditioning system."
- Model
- Agilent / Keysight E1328A
- Calibration
- Available on request
- Price
- $563
- Status
- In stock
- RFQ ref
- E1328A
This unit
The Agilent/Keysight E1328A is a 4-channel D/A converter module designed for precision analog signal generation within VXI modular test systems. This B-size, 1-slot VXI instrument provides four independent, isolated digital-to-analog converter channels, each with 16-bit resolution and configurable output modes for DC voltage or DC current applications. Each channel floats independently up to 350 Vdc from ground, enabling flexible system control, automation, and signal conditioning across diverse measurement and test environments.
Technical Specifications
- Module Type: VXI B-size, 1-slot module
- Channels: 4 independent, isolated D/A converters
- Resolution: 16-bit
- Output Ranges (single channel):
Voltage: ±10.92 V
Current: ±21.84 mA
Output Ranges (series/parallel expansion):
Voltage: Up to 48 V
Current: Up to 96 mA
- Channel Isolation: 350 Vdc maximum floating voltage from ground per channel
- Compliance Current: 32 mA output
- Output Protection: Integrated short-circuit protection
- Remote Voltage Sensing: Supported with no-fault operation
- Calibration: Software-accessible electronic adjustment with per-channel calibration constants for voltage and current modes
Key Features
- Register-based VXI interface with SCPI command support
- Multiple channels connectable in series or parallel for expanded voltage/current ranges
- Independent channel adjustment constants enable per-mode calibration
- Integrated output protection against short-circuit faults
Typical Applications
- Automated test system signal conditioning
- Precision voltage and current source applications
- System control and instrumentation within VXI platforms
- Calibration support with integrated multimeter and multiplexer modules
Compatibility & Integration Designed for B-size VXI mainframes; C-size mainframe operation supported via the E1403C adapter. Integrates with VXI-based multimeters (e.g., E1326B) and multiplexer modules. SCPI-compatible programming with available Keysight instrument drivers. EMC certified to CISPR 11:1990, EN55011, EN50082-1:1992, and IEC 801 immunity standards.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | ±10.92 Vdc to ±12 Vdc (voltage mode) |
Agilent / Keysight E1328A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E1328A. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E1328A faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E1328A price
This Agilent / Keysight E1328A is listed at $563.2. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E1328A calibration cost
NIST-traceable calibration for the Agilent / Keysight E1328A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
