Agilent/Keysight E1330B
Agilent / Keysight VXI Modules. Model: E1330B.
- Model
- Agilent / Keysight E1330B
- Calibration
- Available on request
- Price
- $1,500
- Status
- In stock
- RFQ ref
- E1330B
This unit
The Agilent/Keysight E1330B is a B-size, single-slot VXI module providing four independent 8-bit digital input/output ports for data communication and control within VXIbus systems. Each port configures independently for input or output with positive or negative true logic selection. The module supports flexible data transmission across individual bits, bytes (8-bit), words (16-bit), and long words (32-bit), making it suitable for diverse digital control applications.
Three dedicated handshake and control lines per port
FLG (flag input), CTL (control output), and I/O (status) - enable synchronous data transfer and status monitoring. Additional control lines (PIR, /RES, STS) support advanced interrupt management and custom handshaking protocols. The E1330B implements Release on Interrupt Acknowledge (ROAK) interrupt circuitry, ensuring full compatibility with SCPI programming, C-SCPI, IS in SICL, and plug-and-play drivers.
The register-based architecture integrates into larger VXI measurement and control systems.
Technical Specifications
- Form Factor: B-size, 1-slot register-based VXI module
- Digital I/O Ports: 4 independent 8-bit ports
- Port Configuration: Input or Output, selectable per port
- Logic Levels: Positive or Negative True Logic
- Data Transmission Modes: Individual bits, bytes (8-bit), words (16-bit), long words (32-bit)
- Handshake Lines: 3 lines per port (FLG, CTL, I/O)
- Control Lines: PIR (peripheral interrupt), /RES (peripheral reset), STS (status)
- Interrupt Handling: Release on Interrupt Acknowledge (ROAK)
- Physical Dimensions: 12 × 10 × 5 inches (approximate)
- Weight: 3 lbs (approximate)
Key Features
- Configurable 8-bit ports for flexible input/output operations
- Dual logic-level support for positive and negative true logic applications
- Multi-width data transmission: bit, byte, word, and long-word modes
- Dedicated handshake and control lines for synchronous communication
- ROAK interrupt circuitry for driver compatibility
- Register-based programming model
Typical Applications
- Digital control and monitoring in VXI-based test systems
- Multi-bit parallel data acquisition and transmission
- Handshaked peripheral communication and synchronization
- Custom logic-based control signaling
Compatibility & Integration The E1330B operates with VXI Command Modules (E1300A/E1301A, E1306A, E1405A/B, E1406A). For C-size mainframe deployment, the E1403C Adapter enables compatibility. Full SCPI programming support and plug-and-play driver support via ROAK interrupt alignment with standard Agilent VXI card specifications.
Agilent / Keysight E1330B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E1330B. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E1330B faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E1330B price
This Agilent / Keysight E1330B is listed at $1,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E1330B calibration cost
NIST-traceable calibration for the Agilent / Keysight E1330B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
