Agilent/Keysight E1476-80010
Agilent / Keysight VXI Modules. Model: E1476-80010.
- Model
- Agilent / Keysight E1476-80010
- Calibration
- Available on request
- Price
- $2,500
- Status
- In stock
- RFQ ref
- E1476-80010
This unit
The Agilent/Keysight E1476-80010 is a QUIC-type terminal block accessory that provides screwless spring clamp connectivity to the E1476A High-Density Reed Relay Multiplexer module. This accessory enables direct access to high, low, and guard connections across all 64 channels of the E1476A, facilitating high-point count measurements and multi-wire switching configurations within VXIbus systems.
Technical Specifications
Terminal Interface- QUIC spring clamp terminal block
- Wire size compatibility: 22 to 26 AWG (0.5, 0.75, 0.9 mm)
- Dual bank channel configuration supporting flexible measurement topologies E1476A Module Compatibility
- C-size, 1-slot, register-based VXI module
- 64 total switching channels
- Two-wire switching: up to 64 channels
- Three-wire switching: up to 32 channels
- Four-wire switching: up to 32 channels Supported Measurement Types
- High-integrity voltage measurements (three-wire configuration)
- Two-wire resistance measurements
- Precision four-wire resistance measurements
- Thermocouple temperature measurements with automatic cold junction compensation
Key Features
- Screwless QUIC terminals eliminate the need for conventional screw fasteners, reducing assembly time and connection inconsistencies
- Low-offset, thermocouple-compensated design for precision temperature measurement applications
- Dynamically configurable channel allocation allows channels to function as sense or current source channels
- Dedicated guard connections enable three-wire high-integrity voltage measurements for sensitive analog circuits
- Supports 32 four-wire measurement channels through dual bank configuration
Compatibility & Integration The E1476-80010 terminal block directly interfaces with the E1476A multiplexer card via direct insertion onto the component card. Integration within VXIbus systems allows remote control and automated channel switching via register-based commands, making the accessory suitable for multi-channel data acquisition and laboratory switching applications requiring precision switching and measurement integrity.
Agilent / Keysight E1476-80010 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E1476-80010. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E1476-80010 faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E1476-80010 price
This Agilent / Keysight E1476-80010 is listed at $2,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E1476-80010 calibration cost
NIST-traceable calibration for the Agilent / Keysight E1476-80010 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
