Agilent/Keysight E1564A
The Agilent/Keysight E1564A is a VXI high-density multiplexer module. It features 128 channels, offering high-density switching for automated test systems. This module is designed to increase throughput and reduce test times by enabling efficient signal routing and measurement.
- Model
- Agilent / Keysight E1564A
- Calibration
- Available on request
- Price
- $2,500
- Status
- In stock
- RFQ ref
- E1564A
This unit
The Agilent/Keysight E1564A is a register-based VXI digitizer module housed in a C-size, 1-slot form factor. Designed for electronic production test and electromechanical characterization, this four-channel instrument delivers 14-bit resolution at up to 800 kSa/s per channel and performs reliably in high-noise electrical environments. Simultaneous sampling across all channels enables precise time-correlated transient measurements, while scalable PC SIMM memory - expandable from 4 Mbytes to 64 Mbytes - captures extended waveform records.
Selectable input filters on each channel provide flexible signal conditioning. The module integrates a calibration source with flash ROM and supports both time and event-triggered acquisition modes with programmable pre- and post-trigger windows. Data streams as 16-bit integers corrected for offset and gain errors through either FIFO or flat-file memory architectures.
Technical Specifications
- Architecture: Register-based VXI module; C-size, 1-slot
- Channels: 4 independent
- A/D Resolution: 14-bit per channel
- Sample Rate: Up to 800 kSa/s per channel
- Memory: PC SIMM, 4 Mbytes to 64 Mbytes scalable
- Input Filters: Four selectable per channel
- Data Format: 16-bit integer (offset and gain corrected)
- Triggering: Time or event modes with programmable pre- and post-trigger counts
- Power Consumption: 37.4 W/slot; +5 V (1.1 A IPM / 0.5 A IDM), +12 V (0.6 A IPM / 0.1 A IDM), −12 V (0.6 A IPM / 0.1 A IDM), +24 V (0.01 A IPM / 0.05 A IDM), −24 V (0.01 A IPM / 0.05 A IDM), −5.2 V (0.1 A IPM / 0.01 A IDM), −2 V (0.1 A IPM / 0.01 A IDM)
- Pressure Drop: 0.18 mm H₂O
Key Features
- Simultaneous sampling across all four channels using a single internal or external time base
- Integrated calibration source with flash ROM for maintaining measurement accuracy
- Independent channel isolation for clean analog input
- Block-mode data transfers support continuous digitization and transient capture
- SCPI command set and VXIplug&play driver support for automated test integration
Typical Applications
- Electronic production test in high-noise industrial environments
- Electromechanical transient characterization
- Time-correlated multi-channel signal acquisition
- Automated test systems requiring precise trigger and timing control
Compatibility & Integration
- VXIbus register-based architecture ensures compatibility with standard VXI platforms
- Shared programming model with the E1563A for consistent system integration
- SCPI commands and VXIplug&play instrument drivers included
Agilent / Keysight E1564A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E1564A. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E1564A faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E1564A price
This Agilent / Keysight E1564A is listed at $2,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E1564A calibration cost
NIST-traceable calibration for the Agilent / Keysight E1564A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
