Agilent / Keysight E9850A VXI Pentium PC Controller, 450 MHz, Windows 95/NT
Agilent / Keysight VXI Modules. Model: E9850A.
- Model
- Agilent / Keysight E9850A
- Calibration
- Available on request
- Price
- $5,650
- Status
- In stock
- RFQ ref
- E9850A
This unit
The E9850A is a C-size, 2-slot VXI embedded PC controller that integrates a 450 MHz Intel Pentium II processor directly into Keysight VXI mainframes. Designed for measurement automation and complex data processing in VXI-based test systems, this message-based controller runs Windows 95 or Windows NT 4.0 and provides field-upgradeable architecture with standard Slot 1 processor compatibility.
Technical Specifications
Processor & Memory- 450 MHz Intel Pentium II processor (Slot 1 architecture)
- 64 MB SDRAM standard; expandable to 384 MB via two SODIMMs
- 4.2 GB Ultra DMA 33 hard drive
- 3.5-inch, 1.44 MB floppy drive Operating System Support
- Windows 95
- Windows NT 4.0 (VXIplug&play compatible) I/O & Connectivity
- Advanced Graphics Port (AGP) with 2 MB 64-bit accelerated SGRAM
- Wide Ultra SCSI-3 port
- 10/100 BaseT Ethernet (RJ45)
- IEEE 488.2 GPIB
- Two RS-232 serial ports
- IEEE-1284 parallel port
- Two USB ports (Windows 95 only)
- PS/2 keyboard and mouse ports Expansion
- One internal AT/PCI slot (full-length PCI or 16-bit ISA)
- Two front panel PCMCIA slots (Type I/II/III and Type I/II)
Key Features
- Field-upgradeable Pentium II processor in Slot 1 architecture
- Dual PCMCIA slots support multiple peripheral configurations
- VISA and SICL programming interfaces
- VXI Resource Manager compatibility
- Embedded directly into E84XX, E1401B, or E1421B mainframes
Typical Applications Automation of multi-slot VXI measurement systems, ATE controllers for complex test sequences, data acquisition and processing in distributed measurement networks.
Compatibility & Integration Integrates as a message-based VXI controller within standard Keysight mainframes. Supports VXI Resource Manager configuration. GPIB, Ethernet, and serial interfaces enable integration into existing test infrastructure.
Agilent / Keysight E9850A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E9850A. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E9850A faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E9850A price
This Agilent / Keysight E9850A is listed at $5,650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E9850A calibration cost
NIST-traceable calibration for the Agilent / Keysight E9850A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
