Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET IndustryPack with Four 16-Bit Timers, Extended Temperature
IndustryPack module with four 16-bit timers, designed for extended temperature applications.
- Model
- Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET
- Calibration
- Available on request
- Price
- $450
- Status
- In stock
- RFQ ref
- IP-UNIDIG-T-ET
This unit
The IP-UNIDIG-T-ET is a single-wide IndustryPack module combining 24 buffered digital I/O lines with four 16-bit timers for extended temperature industrial applications. Each I/O line is individually programmable as input or output, with high-current output drivers and wide input voltage tolerance. The module delivers solid signal conditioning through double-buffered architecture, supporting synchronized multi-module configurations via Master/Slave mode.
Technical Specifications
- I/O Architecture: 24 buffered TTL digital I/O lines, individually configurable as input or output
- Output Drive: Sinks up to 64 mA continuous load current per line
- Input Voltage Range: +15 V to -5 V
- Logic Threshold: 1.25 V for CMOS/TTL compatibility
- Timers: Four 16-bit timers
- Temperature Range: Extended temperature operation
- Module Format: Single-wide IndustryPack
Key Features
- Double-buffering for inputs and outputs enables simultaneous latching of multiple I/O signals
- External clock triggering with selectable polarity (rising or falling edge) for buffered transfers
- Master/Slave synchronization mode allows one module to redrive an external clock source to multiple slave units
- Compatible with any CMOS/TTL clock source
- High-voltage input tolerance accommodates both single-ended and differential signaling schemes
Typical Applications The IP-UNIDIG-T-ET suits real-time industrial control, synchronized data acquisition, and embedded systems requiring low-latency digital multiplexing across harsh temperature environments. Master/Slave configurations enable distributed I/O expansion without dedicated synchronization hardware.
Compatibility & Integration Module integrates into standard IndustryPack-compatible carrier boards. Operates from standard industrial carrier power rails. Input/output lines are TTL-level compatible, interfacing directly with standard logic families and sensor signal conditioning modules.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+15 V to -5 V input, 64 mA output sink current |
Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET. Calibration covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET faults: ESD-damaged input protection, failed driver ICs, connector pin damage. Most failures involve ESD-damaged input protection circuitry, failed logic driver ICs, or mechanical connector pin damage. Board-level component replacement is standard practice.
Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET price
This Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET is listed at $450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET calibration cost
NIST-traceable calibration for the Abaco Systems / SBS / Greenspring IP-UNIDIG-T-ET is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
