JDS Uniphase MAP200-MVOA-A2DSM
The JDS Uniphase MAP200-MVOA-A2DSM is a modular optical variable attenuator designed for precise control of optical signal power. It features a compact design and is suitable for integration into automated test systems and optical networks.
- Model
- JDS Uniphase MAP200-MVOA-A2DSM
- Calibration
- Available on request
- Price
- $2,100
- Status
- In stock
- RFQ ref
- MAP200-MVOA-A2DSM
This unit
The JDS Uniphase MAP200-MVOA-A2DSM is a dual variable optical attenuator module for the MAP-200 platform, delivering precise optical power control across the telecom spectrum. This hot-swappable cassette combines stepper motor and filter-based attenuation with an integrated power monitor, enabling accurate signal management in automated test systems and optical networks. Ultra-low insertion loss (typically <1.0 dB), flat spectral response, and transition speeds up to 25 dB/s minimize measurement uncertainty and reduce test cycles.
Technical Specifications
Module Configuration: Dual attenuator with integrated power monitor
Insertion Loss: Typically 55 dB typical (PC/APC), >30 dB typical (PC)
Backreflection: Low, to minimize instabilities from reflected light
Shutter Isolation: 100 dB typical
Warm-up Time: 30 minutes
Operating Temperature: 0 to 50°C
Storage Temperature: -30 to 60°C
Operating Humidity: <90% RH non-condensing at 23°C; <20% at 50°C
Calibration Interval: 2 years
Dimensions: 4.06 × 13.26 × 37.03 cm
Weight: 1.3 kg
Key Features
High-accuracy, high-repeatability attenuation control
Spectral uniformity across the 1250–1650 nm band
Fast transition speed reduces test time overhead
Low backreflection design for stable operation
LXI Class C compliance with Ethernet connectivity
IVI driver support for multi-platform integration
Typical Applications
Optical signal power characterization
Automated attenuation testing in telecom and datacom
Power-dependent measurement validation
Dynamic range assessment
Compatibility & Integration The MVOA-A2DSM integrates into the MAP-200 modular platform as a hot-swappable cassette. Platform-level Ethernet connectivity and virtual instrument drivers enable rapid integration into diverse test frameworks without custom hardware interface design.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1250 nm to 1650 nm |
JDS Uniphase MAP200-MVOA-A2DSM — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MAP200-MVOA-A2DSM. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase MAP200-MVOA-A2DSM faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
JDS Uniphase MAP200-MVOA-A2DSM price
This JDS Uniphase MAP200-MVOA-A2DSM is listed at $2,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MAP200-MVOA-A2DSM calibration cost
NIST-traceable calibration for the JDS Uniphase MAP200-MVOA-A2DSM is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
