Agilent / Keysight N2757A GPIB Interface Module
Agilent / Keysight N2757A GPIB Interface Module,"Compact module for adding GPIB connectivity to compatible instruments via USB. Enables remote control and data acquisition using standard IEEE-488 protocol. Plug-and-play operation simplifies automation and integration into test environments for seamless communication with legacy and modern equipment."
- Model
- Agilent / Keysight N2757A
- Calibration
- Available on request
- Price
- $124
- Status
- In stock
- RFQ ref
- N2757A
This unit
The Keysight N2757A GPIB Interface Module adds IEEE-488 connectivity to Agilent 54620/40-series oscilloscopes, enabling remote instrument control and data acquisition over USB. This compact, bus-powered module supports plug-and-play installation with automatic driver configuration, eliminating manual setup delays. The N2757A delivers GPIB data transfer rates up to 1.15 MB/s and allows daisy-chain connection of up to 14 instruments on a single GPIB network.
Hot-swappable USB connectivity lets you connect and disconnect without powering down the host PC.
Technical Specifications
- GPIB Standard Compliance: IEEE 488.1 and IEEE 488.2
- Data Transfer Rate (GPIB): Up to 1.15 MB/s
- USB Interface: Standard Type-A connector
- GPIB Connector: Standard 24-pin IEEE-488
- Maximum Daisy-Chain Instruments: 14 via GPIB
- Maximum Converters per PC: 4 units
- Power Consumption: +5 V, 500 mA maximum; 200 mA typical
- Power Source: USB bus-powered (no external supply required)
Key Features
- Plug-and-play USB connectivity with automatic driver installation on Windows XP, Vista, and Windows 7
- Hot-pluggable design allows connection changes without system restart
- Three LED status indicators: READY, ACCESS, and FAIL for real-time operation monitoring
- Improved GPIB cable shielding design reduces RFI levels; includes clip-on ferrite bead for additional EMI suppression
- Bundled Keysight I/O Libraries Suite and VISA software for instrument control and interoperability
Typical Applications
- Automated test system integration for legacy oscilloscope networks
- Remote data acquisition from Agilent 54621A, 54622A, 54624A, 54641A, 54642A, and 54621D/22D/41D/42D models
- Retrofit GPIB control to instruments lacking native IEEE-488 connectivity
- Multi-instrument synchronization and coordinated measurement campaigns
Compatibility & Integration The module integrates with Keysight I/O Libraries Suite for device configuration. Software compatibility extends to Agilent VEE 5.0+, LabVIEW 5.1+, and Visual C/C++ 5.0/6.0. Use with IntuiLink connectivity software for direct 54600-series oscilloscope linking. Standard USB Type-A connection to the host PC; rear-panel GPIB connector attaches directly to compatible instruments with supplied screw fastening.
Agilent / Keysight N2757A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight N2757A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent / Keysight N2757A price
This Agilent / Keysight N2757A is listed at $124.18. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight N2757A calibration cost
NIST-traceable calibration for the Agilent / Keysight N2757A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
