Agilent/Keysight P5002A
Agilent / Keysight Vector Network Analyzers. Frequency Range: 9 kHz to 9 GHz, Dynamic Range: 146 dB.
- Model
- Keysight P5002A
- Calibration
- Available on request
- Price
- $7,950
- RFQ ref
- P5002A
This unit
The Keysight P5002A is a 2-port vector network analyzer operating from 9 kHz to 9 GHz, controlled via USB 3.0 from an external PC. This compact rackmount instrument delivers 146 dB dynamic range with -134 dBm noise floor and +12 dBm output power, making it suitable for RF component characterization, device development, and manufacturing test environments.
Technical Specifications
- Frequency Range: 9 kHz to 9 GHz
- Ports: 2 input/output
- Port Connectors: 3.5 mm female (both ports); MCX
- Port Impedance: 50 Ohms
- Dynamic Range: 146 dB
- Output Power: 12 dBm
- Power Sweep Range: -60 to +12 dBm
- Noise Floor: -134 dBm
- Harmonic Suppression: -25 dBc
- Operating Temperature: 0 to 50°C
- Dimensions: 176 × 48 × 333 mm (W × H × D)
- Weight: 1.88 kg
Key Features
- PC-controlled architecture via USB 3.0; GPIB, Ethernet/LAN, and RS-232 also supported
- Intuitive graphical interface matching Keysight PNA software
- Optional measurement modes: pulsed RF, fixture removal, time-domain analysis, noise figure with vector correction, embedded LO, gain compression, spectrum analysis, and multiport calibrated measurements
- Supports all Keysight electronic calibration (ECal) modules for rapid setup and verification
- Cascading capability: two USB instruments can be networked to extend port count
- Rackmount kit available for single or dual-stack configurations
- Shipped with USB 3.0 cable assembly, external AC-DC power supply, power cord, quick-start guide, and calibration certificate
Typical Applications
- Component S-parameter measurement and characterization
- Filter, amplifier, and matching network development and validation
- PCB trace and transmission line analysis
- Quality control and production test
- Research and prototype evaluation
Compatibility & Integration External PC required for operation; vendor provides configuration guidance and troubleshooting documentation covering PC selection, setup procedures, and connection protocols. Multiple communication interfaces enable integration into existing lab automation and ATE frameworks.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 9 GHz | Power Range (dBm): '-60 to +12 dBm |
Keysight P5002A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keysight P5002A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Keysight P5002A price
This Keysight P5002A is listed at $7,950. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keysight P5002A calibration cost
NIST-traceable calibration for the Keysight P5002A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
