DDC SB36243IA-3L0 Synchro Angle Position Indication PCI Card
DDC Data Acquisition Systems (DAQ). Channels: ** Six independent synchro/resolver-to-digital con, Accuracy: ** 3 arc-minutes (standard), Frequency Range: ** 57 Hz to 7 kHz.
- Model
- DDC SB36243IA-3L0
- Calibration
- Available on request
- Price
- $3,500
- Status
- In stock
- RFQ ref
- SB36243IA-3L0
This unit
The DDC SB36243IA-3L0 is a half-size PCI card that converts synchro and resolver signals into high-resolution digital angle position data. Six independent channels, each equipped with a 16-bit RD-19230 monolithic converter, deliver 3 arc-minute accuracy (1 arc-minute for transformer-isolated variants) across input frequencies from 57 Hz to 7 kHz. The card interfaces electromechanical angle sensors directly to the PCI bus, supporting signal amplitudes up to 26 Vrms or 115 Vrms depending on the power oscillator configuration.
Technical Specifications
Channels: Six independent synchro/resolver-to-digital conversion channels
Converter: DDC RD-19230 16-bit monolithic converter per channel
Accuracy: 3 arc-minutes (standard); 1 arc-minute (transformer-isolated)
Jitter: ±1 LSB at 47 Hz to 1 kHz
Input Frequency Range: 57 Hz to 7 kHz
Input Signal Amplitude: Up to 26 Vrms or 115 Vrms (oscillator-dependent)
Power Supply: +5 Vdc, 0.665 A minimum (oscillator, no load)
Logic Output: TTL compatible
Logic 0: 1.6 mA @ 0.4 V; Logic 1: 0.4 mA @ 2.8 V (10 TTL loads)
Form Factor: Half-size PCI, 6.875 × 4.2 × 0.57 inches
Operating Temperature: 0 to +71 °C or −40 to +85 °C
Key Features
Built-in synthesized reference eliminates phase-shift errors up to 45°
Integrated turns counter tracks synchro/resolver rotations with direction information
Incremental encoder output (A, B, Zero Index) per channel
Self-test capability: injects 45° test angle; flags channels not reporting 45° ± 1°
Built-in-test detects Loss-of-Signal, Loss-of-Tracking, and Loss-of-Reference faults
Plug-and-play configuration via PC BIOS - no jumpers or switches required
Supports shared interrupts for simplified installation
Typical Applications Radar, infrared and navigation systems, fire control, flight instrumentation and simulators, motor and motion feedback controls, robotics, machine tool control, antenna positioning, process control.
Compatibility & Integration PCI bus interface. Each channel operates independently, allowing mixed-signal processing across six simultaneous synchro or resolver inputs.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 57 Hz to 7 kHz | Voltage / Current Range: '+5 Vdc @ 0.665 A minimum |
DDC SB36243IA-3L0 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the DDC SB36243IA-3L0. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
DDC SB36243IA-3L0 price
This DDC SB36243IA-3L0 is listed at $3,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
DDC SB36243IA-3L0 calibration cost
NIST-traceable calibration for the DDC SB36243IA-3L0 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
