Ametek / VTI Instruments / VXI Technology SM2002 12-Channel, 10A SPST Power Switch SMIP Module
Ametek / VTI Instruments / VXI Technology VXI Modules. Channels: 12, Channel: 10A.
- Model
- Ametek / VTI Instruments / VXI Technology SM2002
- Calibration
- Available on request
- Price
- $1,100
- Status
- In stock
- RFQ ref
- SM2002
This unit
The Ametek VTI Instruments SM2002 is a 12-channel SPST power switch module built on the SMIP interface for VXI-based test systems. Each channel handles up to 10A, making it ideal for power sequencing, multi-subsystem distribution, and high-current switching in automated test equipment. The module integrates directly into VXI chassis for straightforward system integration.
Technical Specifications
- Channels: 12
- Switch Configuration: Single-Pole Single-Throw (SPST)
- Current Rating per Channel: 10A
- Module Interface: SMIP (Switch Module Interface Protocol)
- System Architecture: VXI (VMEbus eXtensions for Instrumentation)
Key Features
- 12 independent SPST switching channels
- 10A per-channel current capacity
- SMIP interface for direct VXI integration
- Designed for high-density power control in ATE systems
Typical Applications
- Power sequencing and control of devices under test (DUTs)
- Multi-subsystem power distribution
- Selective enable/disable of power to test points
- High-current switching in power supply test scenarios
Compatibility & Integration The SM2002 operates within VXI-compliant test systems and works with standard VXI controllers and test executive software. Its SMIP interface enables direct integration into existing VXI chassis without adapter complexity.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 10A per channel |
Ametek / VTI Instruments / VXI Technology SM2002 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Ametek / VTI Instruments / VXI Technology SM2002. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Ametek / VTI Instruments / VXI Technology SM2002 faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Ametek / VTI Instruments / VXI Technology SM2002 price
This Ametek / VTI Instruments / VXI Technology SM2002 is listed at $1,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Ametek / VTI Instruments / VXI Technology SM2002 calibration cost
NIST-traceable calibration for the Ametek / VTI Instruments / VXI Technology SM2002 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
