Ametek / VTI Instruments / VXI Technology SMP4002 High-Density Matrix Module
Ametek / VTI Instruments / VXI Technology VXI Modules. Voltage: 300 V ac, Channel: count signal routing with low crosstalk and fast s.
- Model
- Ametek / VTI Instruments / VXI Technology SMP4002
- Calibration
- Available on request
- Price
- $1,650
- Status
- In stock
- RFQ ref
- SMP4002
This unit
The Ametek / VTI Instruments / VXI Technology SMP4002 is a high-density matrix module that performs signal routing and switching within automated test systems. This 1 (4×36) 2-wire matrix operates as part of the SMIP II Series, a modular platform designed for VXIbus systems. The module handles switching voltages to 300 V ac/dc and currents to 2 A per channel, with maximum switching power ratings of 60 W dc and 125 VA.
Path resistance remains below 500 mΩ, and insulation resistance exceeds 1×10⁹ Ω, ensuring signal integrity across configurations.
Technical Specifications
- Configuration: 1 (4×36) 2-wire matrix
- Current Rating: 2 A per channel
- Maximum Switching Voltage: 300 V ac, 300 V dc
- Maximum Switching Power: 60 W dc, 125 VA
- Path Resistance: 1×10⁹ Ω
- Offset Voltage (HI-LO): 45 MHz
- Switching Time: <3 ms
Key Features
- Multi-layer PCB construction with extensive signal shielding
- Automatic scanning and programmable timing delays
- Extensive triggering options
- Modular building block design for flexible dense configurations
- Compact form factor optimized for high-density installations
Typical Applications The SMP4002 serves automated test and data acquisition systems requiring high-channel-count signal routing with low crosstalk and fast switching performance.
Compatibility & Integration Designed for VXIbus platforms, the SMP4002 integrates with SMP1100 single-slot and SMP1200 double-slot base units. It operates with SMIP II Series software and drivers, and combines with other SMIP II modules to create custom switching architectures.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to >45 MHz | Voltage / Current Range: 0-2 A per channel, 0-300 V AC/DC |
Ametek / VTI Instruments / VXI Technology SMP4002 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Ametek / VTI Instruments / VXI Technology SMP4002. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Ametek / VTI Instruments / VXI Technology SMP4002 faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Ametek / VTI Instruments / VXI Technology SMP4002 price
This Ametek / VTI Instruments / VXI Technology SMP4002 is listed at $1,650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Ametek / VTI Instruments / VXI Technology SMP4002 calibration cost
NIST-traceable calibration for the Ametek / VTI Instruments / VXI Technology SMP4002 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
