Anritsu 68163B Synthesized Sweep Generator, 2 – 40.0 GHz
Anritsu 68163B,Covers 2 to 40.0 GHz with dependable sweep performance and signal integrity. Ideal for testing broadband devices and systems in radar, satellite, and high-frequency communications.
- Model
- Anritsu 68163B
- Calibration
- Available on request
- Price
- $13,479
- Status
- In stock
- RFQ ref
- 68163B
This unit
The Anritsu 68163B is a synthesized sweep generator covering 2 to 40.0 GHz, engineered for precision signal generation across broadband testing applications. It delivers dependable sweep performance and signal integrity for radar, satellite communications, and high-frequency communication systems. The instrument supports analog, step, and manual sweep modes with independently selectable sweep widths from 1 kHz to full range.
Step sweep capability spans 1 to 10,000 steps with dwell times from 1 ms to 99 seconds, enabling rapid frequency transitions with typical switching times under 15 ms plus 1 ms per GHz of step size, or 40 ms maximum. Dual-range alternate sweep operation allows independent power level association across sweep segments.
Technical Specifications
- Frequency Range: 2 to 40.0 GHz
- Frequency Resolution: 1 MHz
- Sweep Modes: Analog, Step (1–10,000 steps), Manual, and Alternate sweep between two independent ranges
- Sweep Width: 1 kHz to full range, independently selectable
- Step Size Range: 1 kHz to full instrument range
- Dwell Time per Step: 1 ms to 99 seconds
- Switching Time: Typical maximum of 15 ms + 1 ms/GHz step size, or 40 ms, whichever is less
- Output Level: Up to +17 dBm maximum; -125 dBm minimum
- Output Accuracy (Sweep Mode): 2 dB
- SSB Phase Noise: Typically -100 dBc at 10 kHz offset from 10 GHz
- Modulation: Internal AM, FM, phase modulation, and pulse modulation; user-downloadable complex modulation; external AM and FM support; phase-lock capable
Key Features
- User-selectable level flatness correction
- Self-test and secure mode functionality
- Master/slave operation support
- GPIB (IEEE 488) remote control via rear-panel connector
- Compact 13.3 cm rack height minimizes footprint
Typical Applications Radar systems, satellite communication testing, broadband device characterization, and high-frequency communication system validation.
Compatibility & Integration Operates with Anritsu ML4803A power meter and Hewlett-Packard 437B, 438A, and 70100A power measurement instruments. Full GPIB and SCPI programming support via included manuals.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2 to 40.0 GHz | Power Range (dBm): '-125 dBm to +17 dBm |
Anritsu 68163B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 68163B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 68163B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 68163B price
This Anritsu 68163B is listed at $13,479. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 68163B calibration cost
NIST-traceable calibration for the Anritsu 68163B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
