Agilent/Keysight 83595
Agilent / Keysight RF Signal Sources. Accuracy: ±5 MHz (Bands 0–1), Accuracy: ±15 to ±50 MHz depending on band and sweep confi, Accuracy: ±15 to ±50 MHz or ±0.5% of sweep width.
- Model
- Agilent / Keysight 83595
- Calibration
- Available on request
- Price
- $1,019
- Status
- In stock
- RFQ ref
- 83595
This unit
The Agilent/Keysight 83595 is a broadband RF and microwave sweep generator plug-in module engineered for the 8350B sweep oscillator mainframe. It delivers continuous frequency coverage from 0.01 GHz to 26.5 GHz across five contiguous bands, with exceptional frequency accuracy and stability. The module excels in scalar network analysis, local oscillator applications for signal down-conversion, and standalone RF signal generation.
Its architecture combines precise frequency control with flexible power leveling, making it suitable for both swept and CW operation across DC to millimeter-wave test environments.
Technical Specifications
Frequency Performance:- Operating range: 0.01 GHz to 26.5 GHz (Band 0: 0.01–2.4 GHz; Band 1: 2.4–7 GHz; Band 2: 7–13.5 GHz; Band 3: 13.5–20 GHz; Band 4: 20–26.5 GHz)
- CW frequency accuracy: ±5 MHz (Bands 0–1), ±10 MHz (Bands 2–3), ±12 MHz (Band 4)
- Sweep mode accuracy: ±15 to ±50 MHz depending on band and sweep configuration
- Frequency marker accuracy: ±15 to ±50 MHz or ±0.5% of sweep width
- Temperature stability: ±200 to ±800 MHz/°C across bands
- Power supply stability: ±200 kHz to ±800 MHz for 10 dB power change
- Load SWR stability (3:1): ±100 kHz to ±400 MHz depending on band Output Power:
- Maximum leveled output: 10 mW (Bands 0–3), 2.5 mW (Band 4)
- Minimum settable power: –5 dBm
- Power level accuracy: ±1.3 to ±1.8 dB across bands
- Power sweep range: >9 dB calibrated
- Resolution: 0.1 dB (display), 0.01 dB (programmable) Spectral Purity:
- Harmonics and subharmonics: <–25 dBc (Bands 0–3), <–20 dBc (Band 4)
Key Features
- Five-band architecture enables efficient coverage without gaps
- Precision CW and swept frequency generation with independent band accuracy specifications
- Load-tolerant design with minimal SWR-induced frequency drift
- Programmable power control with 0.01 dB resolution for fine-grained signal conditioning
Typical Applications
- Scalar network analysis and impedance measurement
- Heterodyne receiver local oscillator generation
- Broadband RF signal sourcing for component and subsystem testing
- Frequency-dependent device characterization
Compatibility & Integration Designed as a plug-in module for the 8350B mainframe, integrating directly into established test systems. Optional enhanced performance available via Option 002.
Agilent / Keysight 83595 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight 83595. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight 83595 faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Agilent / Keysight 83595 price
This Agilent / Keysight 83595 is listed at $1,019. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight 83595 calibration cost
NIST-traceable calibration for the Agilent / Keysight 83595 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
