Agilent/Keysight E1361A
Agilent / Keysight VXI Modules. Channel: 40 W.
- Model
- Agilent / Keysight E1361A
- Calibration
- Available on request
- Price
- $1,500
- Status
- In stock
- RFQ ref
- E1361A
This unit
The Agilent/Keysight E1361A is a B-size, 1-slot VXI register-based relay matrix module that delivers high-density signal routing and switching for automated test systems. The module features a configurable 4×4 2-wire matrix with latching relays that retain their programmed state through power cycles. Relays reset to open on power-on.
The E1361A supports reconfiguration as a dual 2×4 2-wire matrix or 8:1 2-wire multiplexer, making it adaptable to diverse switching architectures. Each crosspoint switches both Hi and Lo lines independently.
Technical Specifications
Switching Performance- Voltage rating: up to 250 Vdc and 354 Vpk ac
- Current rating: 1 A dc or ac per channel
- Power per channel: 40 W
- Power per module: 320 W / 960 VA
- Closed channel resistance: <1.5 Ω typical, <3.5 Ω end-of-life
- Maximum thermal offset per channel (differential Hi-Lo): 14 µV
- Maximum voltage (any terminal to any other terminal or chassis): 250 V dc, 250 V ac rms, 354 V peak Module Configuration
- Device type: Register-based, A16, slave only
- Module size: B-size, 1-slot
- Relay type: Latching
- Standard matrix: 4×4 2-wire
- Alternative configurations: Dual 2×4 2-wire or 8:1 2-wire multiplexer
Key Features
- Latching relay design eliminates holding current
- Programmed relay state preserved across power loss
- All-relays-open initialization on power-on reset
- 2-wire crosspoint architecture with independent Hi/Lo switching
- Field-reconfigurable matrix topology via jumper removal
- Scalable architecture supports matrix expansion
Typical Applications Automated test equipment, prototyping platforms, custom circuit development, multi-channel signal routing, production test systems requiring dynamic path reconfiguration.
Compatibility & Integration The E1361A integrates into VXIbus systems as a register-based module. C-size system compatibility requires the E1403C adapter. Multiple modules can be connected for expanded matrix configurations. Documentation includes user and service manuals; instrument drivers are available from Keysight Technologies.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz | Voltage / Current Range: 250 V AC rms, 250 V DC, 354 V peak |
Agilent / Keysight E1361A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E1361A. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E1361A faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E1361A price
This Agilent / Keysight E1361A is listed at $1,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E1361A calibration cost
NIST-traceable calibration for the Agilent / Keysight E1361A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
