Agilent / National Instruments E1482B VXI-MXI w/ INTX PCB Assembly
The Agilent/National Instruments E1482B is a VXI-MXI interface module with INTX PCB Assembly. It facilitates communication and data transfer between VXI backplanes and MXI systems, enabling seamless integration and control of VXI instruments. This module is ideal for automated test systems and data acquisition applications.
- Model
- Agilent / National Instruments E1482B
- Calibration
- Available on request
- Price
- $770
- Status
- In stock
- RFQ ref
- E1482B
This unit
The Agilent/National Instruments E1482B is a C-size, 1-slot VXIbus Extender module that bridges external controllers to VXI mainframes via MXIbus connectivity. This register-based module enables multiple VXI mainframes to operate as a unified system and supports daisy-chain configurations for multi-mainframe test architectures. The E1482B includes Interrupt and Timing Extension (INTX) functionality, delivering extended CLK10, programmable trigger lines, seven VXIbus interrupt lines, and system control signal extensions (SYSFAIL*, ACFAIL*, SYSRESET*).
Technical Specifications
- Form Factor: C-size, 1-slot VXI module
- Interface: MXIbus with INTX PCB assembly
- Data Transfer Rate (MXIbus): 2.0 MB/s (16-bit), 4.0 MB/s (32-bit)
- MXIbus Configuration: Supports up to 8 devices per link; maximum cable length 20 meters
- INTX Cable Bus: RS-485 transceivers; 10 Mbaud maximum data rate at distances up to 12 meters; multi-point support for up to 32 drivers/receivers
- Integrated Block Mode: data transfer capability
Key Features
- CLK10 input/output extension via INTX connector
- One of eight programmably selected triggering input/output lines
- Seven VXIbus-defined interrupt lines
- Extensions for SYSFAIL*, ACFAIL*, and SYSRESET* control signals
- SMB connector with minimal CLK10 and trigger/interrupt line extensions
- VXIplug&play-compatible interface
- Slot 0 installation in VXI mainframes when used with external workstation controllers
Typical Applications
- Multi-mainframe VXI system integration
- External workstation controller connection to VXI mainframes
- Automated test system architecture expansion
- Data acquisition setup interconnection
Compatibility & Integration The E1482B integrates with external workstation controllers and VXI mainframes via MXIbus daisy-chain topology, enabling coordinated instrument control across multiple chassis. Compliance with VXIplug&play standards ensures compatibility within broader test automation ecosystems.
Agilent / National Instruments E1482B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / National Instruments E1482B. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / National Instruments E1482B faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / National Instruments E1482B price
This Agilent / National Instruments E1482B is listed at $770. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / National Instruments E1482B calibration cost
NIST-traceable calibration for the Agilent / National Instruments E1482B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
