Spirent SmartBits SMB-200 with 2 x GX-1405Bs
The Spirent SmartBits SMB-200 is a solid chassis that, along with the two GX-1405B test modules, provides comprehensive network performance testing. This setup is ideal for evaluating network devices and infrastructure.
- Model
- Spirent SMB-200/GX-1405B
- Calibration
- Available on request
- Price
- $730
- Status
- In stock
- RFQ ref
- SMB-200/GX-1405B
This unit
The Spirent SmartBits SMB-200 with dual GX-1405B modules is a portable Gigabit Ethernet performance analysis system built for on-site testing and certification of network infrastructure. This compact platform combines a four-slot chassis with two single-port 1000Base-SX fiber modules, enabling high-speed traffic generation, monitoring, and protocol conformance verification. The system supports full-duplex operations and delivers the measurement accuracy, scalability, and remote control capabilities required for network validation in field and laboratory environments.
Technical Specifications
Chassis- Portable analyzer system with 4 SmartCard slots
- Dimensions: 12.25" W × 3" H × 12" D (31.4 cm × 7.7 cm × 30.8 cm)
- Weight: 5 lbs (2.27 kg) fully loaded
- Power: 90–264 VAC, 47–63 Hz
- Operating temperature: 15°C to 40°C
- Relative humidity: 20% to 80% (non-condensing) GX-1405B Gigabit Ethernet SmartCard (qty 2)
- Interface: 1000Base-SX (IEEE 802.3z)
- Fiber type: Multi-mode 850 nm
- Single-port per module
- Full-duplex mode
Key Features
- Host PC connectivity via 10 Mbps Ethernet (RJ-45) or RS-232 remote control
- Multi-chassis synchronization supporting up to 512 units
- GPS-enabled synchronization with 100-ns accuracy timestamps for one-way latency and jitter measurement
- External 10 MHz clock input via RJ-45 expansion interface
- Bundled PC software: SmartWindow, SmartLib, and SmartApplications (Windows compatible)
- Requires unimpeded side-fan airflow
Typical Applications
- Gigabit Ethernet backbone conformance and interoperability testing
- traffic generation and protocol validation
- Network device certification and performance analysis
- On-site infrastructure validation and bottleneck identification
Compatibility & Integration The SMB-200 scales horizontally through multiple chassis units with synchronized operation. Remote control via Internet or serial connection enables unattended testing. The system accepts external timing signals and integrates with Windows-based analysis software for complete test automation and reporting.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 47–63 Hz, 90–264 VAC | Wavelength Range: 850 nm |
Spirent SMB-200/GX-1405B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Spirent SMB-200/GX-1405B. Calibration covers optical reference power levels, electrical signal amplitude calibration, protocol layer verification, and BER measurement floor validation. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Spirent SMB-200/GX-1405B faults: SFP cage mechanical damage, optical port contamination, firmware corruption. Most failures involve SFP/SFP+ cage mechanical damage, optical port contamination, or firmware corruption. Port cleaning and firmware restoration resolve the majority of faults.
Spirent SMB-200/GX-1405B price
This Spirent SMB-200/GX-1405B is listed at $730. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Spirent SMB-200/GX-1405B calibration cost
NIST-traceable calibration for the Spirent SMB-200/GX-1405B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers optical reference power levels, electrical signal amplitude calibration, protocol layer verification, and BER measurement floor validation. Turnaround is 1 to 3 business days after receipt. See full calibration details →
