JDSU TESTPOINT TS-170 17-SLOT MAINFRAME CHASSIS+ N530-0134 MODULE
JDSU Embedded Test Systems. Channel: Two concurrent Gigabit Fiber Channel ports.
- Model
- JDSU TS-170 / N530-0134
- Calibration
- Available on request
- Price
- $1,630
- Status
- In stock
- RFQ ref
- TS-170 / N530-0134
This unit
The JDSU TESTPOINT TS-170 is a 17-slot modular chassis that delivers a scalable platform for multi-protocol test and measurement. Sixteen slots accommodate hot-swappable test modules, with slot 0 reserved for an optional Group Controller. The included N530-0134 dual-port module enables concurrent testing of two Gigabit Ethernet, two 100BASE-FX, or two 10/100/1000BASE-T applications, plus simultaneous two-port Gigabit Fiber Channel validation.
The chassis supports web-browser control via Java plug-in or CLI using ASCII commands, delivering high port density in a single rackmount unit.
Technical Specifications
TS-170 Chassis- 17-slot configuration: 16 test module slots + 1 Group Controller slot
- Hot insertion and removal of modules without system interruption
- Web browser management with Java plug-in or ASCII CLI control
- Supplied with rackmount kit N530-0134 Dual Port Module
- Dual transmit/receive architecture
- Ethernet: Two concurrent Gigabit, 100BASE-FX, or 10/100/1000BASE-T ports
- Fiber Channel: Two concurrent Gigabit Fiber Channel ports
- Layer 2 traffic generation: Constant, Bursty, Ramp, and Flood modes
- Configurable Layer 2 parameters: source/destination MAC, frame format, Type field (DIX), frame length including Jumbo and Undersized, VLAN tagging
- Layer 3 traffic generation: Configurable source/destination IP address and DNS Type
- Layer 2 filtering: MAC source/destination, frame type/length, VLAN ID, VLAN Priority, Broadcast and Multicast frame selection
- Operating modes: Terminate, Monitor, Loopback
- RJ-45 connectors (10/100/1000 Mb/s electrical)
- Full/Half duplex operation with flow control support
- Module dimensions: 2.13 inches H × 12.16 inches W × 9.96 inches D
- Module weight: 5.5 lbs (2.5 kg)
Key Features
- Scalable architecture supporting up to 16 test modules per chassis
- Multi-protocol simultaneous testing capability
- Layer 2 and Layer 3 traffic generation with granular parameter control
- Flexible filtering and traffic classification
- Optional Group Controller integration for centralized management
Typical Applications
- Ethernet validation at multiple speeds and standards
- Fiber Channel port testing and qualification
- Network interface card (NIC) development and verification
- Switch and router port characterization
- Protocol stack testing with Layer 2/3 configuration
Compatibility & Integration The TS-170 accepts any TESTPOINT-compatible module in its 16 user slots, enabling mixed-protocol configurations. Optional Group Controller module plugs into slot 0 for centralized system management and control.
JDSU TS-170 / N530-0134 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDSU TS-170 / N530-0134. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDSU TS-170 / N530-0134 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
JDSU TS-170 / N530-0134 price
This JDSU TS-170 / N530-0134 is listed at $1,630. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDSU TS-170 / N530-0134 calibration cost
NIST-traceable calibration for the JDSU TS-170 / N530-0134 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
