Anritsu 69295A Synthesized Signal Generator, 0.5 – 65.0 GHz
Anritsu 69295A Synthesized Signal Generator,Covers 0.5 to 65 GHz range with excellent output stability and wide power range. Optimized for vector network analysis, radar simulation, and broadband receiver testing.
- Model
- Anritsu 69295A
- Calibration
- Available on request
- Price
- $31,480
- Status
- In stock
- RFQ ref
- 69295A
This unit
The Anritsu 69295A is a synthesized signal generator delivering RF and microwave stimulus across 0.5 GHz to 65.0 GHz with exceptional output stability and wide dynamic range. Built for demanding metrology and device characterization, it combines precise frequency control with multiple modulation formats and flexible sweep architectures. The instrument integrates AM, FM, phase, and pulse modulation alongside user-downloadable complex modulation capabilities, making it suitable for vector network analysis, radar simulation, and broadband receiver testing.
Technical Specifications
Frequency Range: 0.5 GHz to 65.0 GHz Output Power: +17 dBm maximum; –125 dBm minimum Phase Noise: Ultra-low single sideband (SSB) phase noise typical of the Anritsu 69A family; SSB phase noise as low as –136 dBc/Hz (typical) Frequency Resolution: 0.1 Hz (optional, Option 11) Modulation: Internal AM, FM, phase, and pulse modulation; user-downloadable complex modulation Sweep Modes: CW or step sweep with variable dwell (1 ms to 99 seconds per step), 1 to 10,000 steps, step size 1 kHz to full range, sweep width 1 kHz to full range. Switching time <15 ms + 1 ms/GHz or <40 ms (typical max.). Alternate sweep mode between dual ranges with independent power levels. Manual sweep provides phase-locked frequency stepping between limits. Frequency Agility: Programmable GPIB control; stores and addresses up to 1,000 non-sequential frequencies as phase-locked step sweepKey Features
- Excellent output stability for repeatable measurements across wide power range
- Step sweep with independently selectable width and dwell time
- Phase-locked frequency agility under GPIB command
- Dual-range alternate sweep with per-range power assignment
- Modulation modes support both standard and custom waveform generation
Typical Applications
- Vector network analysis
- Radar simulation
- Broadband receiver testing
Compatibility & Integration GPIB interface with IVI technology support; Anritsu provides COM-based IVI drivers for signal generator integration.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.5 GHz to 65.0 GHz | Power Range (dBm): –125 dBm to +17 dBm |
Anritsu 69295A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69295A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69295A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69295A price
This Anritsu 69295A is listed at $31,480. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69295A calibration cost
NIST-traceable calibration for the Anritsu 69295A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
