Fluke 80 Function Generator
The Fluke 80 Function Generator is a versatile tool for generating a wide range of waveforms. It is suitable for various electronic testing, calibration, and signal simulation applications. The generator provides sine, square, triangle, and pulse waveforms with adjustable frequency and amplitude. Its solid design ensures reliability and accuracy in demanding environments.
- Model
- Fluke 80
- Calibration
- Available on request
- Price
- $1,430
- Status
- In stock
- RFQ ref
- 80
This unit
The Fluke 80 Function Generator is a signal generation instrument engineered for electronic testing, calibration, and simulation across benchtop and automated test equipment (ATE) environments. It generates standard waveforms - sine, square, triangle, positive pulse, and negative pulse - with independently adjustable frequency, amplitude, and DC offset. Advanced modulation and sweep capabilities, including AM/FM modulation and linear/logarithmic sweep functions, enable complex signal simulation and device characterization in laboratory and industrial settings.
Technical Specifications
Waveform Generation- Waveforms: Sine, Square, Triangle, Positive Pulse, Negative Pulse
- Frequency Range: 10 MHz to 50 MHz
- Amplitude: Up to 16 Vp-p into 50 Ω; adjustable 1 mV to 10 Vp-p into 50 Ω
- Output Impedance: 600 Ω typical, 50 Ω selectable
- DC Offset: ±10 V from 50 Ω (±5 V into 50 Ω); DC offset below fundamental on 5 M range Modulation and Sweep
- Modulation Types: AM, FM
- AM Depth: 0% to 100% variable
- FM Sensitivity: 2 Vp-p for 50% modulation
- External FM: Supported
- VCO Mode: Supported
- Sweep: Linear and logarithmic with independent start/stop frequencies and configurable sweep times
- Phaselock/Offset Control: Supported Operating Modes
- Continuous, triggered, gated, and triggered burst modes
- Sync Output: 50% duty-cycle square wave at waveform frequency
- Universal Waveforms: User-definable with position markers; up to 100 stored in battery-backed memory
- Instrument Setups: Up to 9 complete configurations stored in battery-backed memory
Key Features
- Autocalibration for optimized accuracy
- Intuitive LCD display interface
- Extended operation may produce thermal rise; fan operation audible
Physical and Environmental
- Dimensions: 212 mm W × 330 mm D × 130 mm H
- Weight: 4.1 kg (9 lb)
- Power: 115 V, 100 V, or 230 V, 50/60 Hz, ±14% operating tolerance, 100 VA maximum
- Operating Temperature: 5 °C to 40 °C, 20% to 80% RH
- Storage Temperature: -10 °C to +65 °C
Compatibility & Integration GPIB/IEEE 488.2 interface standard on models 80/81.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz to 50 MHz | Voltage / Current Range: 100 V, 115 V, 50/60 Hz |
Fluke 80 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke 80. Calibration covers output frequency accuracy, output amplitude accuracy at 50 ohm and Hi-Z load, DC offset accuracy, symmetry and duty cycle accuracy, and arbitrary waveform sample rate accuracy. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fluke 80 faults: BNC output connector wear, output amplifier failure from short-circuit drive, display and keypad membrane switch wear, DDS or DAC failure on 33250A. HP 33120A and Agilent 33220A most common fault is BNC output connector wear from repeated cable insertions. Output amplifier failure on the HP 33120A typically results from sustained short-circuit drive. Agilent 33250A DDS and high-speed DAC failures are rare but require component-level repair and post-repair amplitude verification across the full 80 MHz range.
Fluke 80 price
This Fluke 80 is listed at $1,430. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke 80 calibration cost
NIST-traceable calibration for the Fluke 80 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output amplitude accuracy at 50 ohm and Hi-Z load, DC offset accuracy, symmetry and duty cycle accuracy, and arbitrary waveform sample rate accuracy. Turnaround is 1 to 3 business days after receipt. See full calibration details →
