Agilent/Keysight E1370A
The Agilent/Keysight E1370A is a VXI Data Acquisition Module. It offers versatile data acquisition capabilities within a VXI mainframe environment. Ideal for precision measurement and control applications.
- Model
- Agilent / Keysight E1370A
- Calibration
- Available on request
- Price
- $1,500
- Status
- In stock
- RFQ ref
- E1370A
This unit
The Agilent/Keysight E1370A is a VXI driver module for microwave switches and programmable step attenuators operating up to 26.5 GHz. This B-size, 2-slot register-based module supplies control, drive, and power circuitry to support either single-pole multi-throw switches or broadband step attenuators in 50 Ω systems.
Technical Specifications
- Module Format: B-size VXI, 2-slot, register-based architecture
- Frequency Range: Up to 26.5 GHz (limited by installed switch or attenuator)
- Impedance: 50 Ω
- Connector Interface: 14-pin DIP socket for switch/attenuator connection
- Power Supply: Selectable internal or external energizing power
- RF Connectors: APC-3.5 (SMA compatible) on switches; SMA female standard on attenuators
Key Features Microwave Switch Support Accommodates Keysight 8766K (SP3T), 8767K (SP4T), 8768K (SP5T), and 8769K (SP6T) unterminated switches. Each module accepts a single switch unit connected via the 14-pin DIP socket, allowing internal mounting or remote cabling. Programmable Step Attenuator Support Compatible with Keysight 33320G/H, 33321G/H, 33322G/H, and 33323K series attenuators. Attenuators feature broadband accuracy, high repeatability, and rapid switching with programmable steps of 1 dB or 10 dB resolution up to 110 dB maximum attenuation. Some models cover DC to 18 GHz. Cabling Flexibility For operation up to 18 GHz, high-quality flexible cable with SMA connectors is recommended. Frequencies above 18 GHz require semi-rigid type cable with APC 3.5 connectors.
Typical Applications
- RF/microwave test and measurement systems requiring automated switching
- Frequency-dependent attenuation in signal conditioning circuits
- Multi-port source/load switching in network analysis
- Broadband signal routing in millimeter-wave test setups
Compatibility & Integration Designed for integration into VXI mainframe systems with register-based command control. The module's dual-slot configuration and DIP socket architecture enable either local component installation or distributed remote switching topologies across multiple mainframes.
Agilent / Keysight E1370A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E1370A. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E1370A faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E1370A price
This Agilent / Keysight E1370A is listed at $1,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E1370A calibration cost
NIST-traceable calibration for the Agilent / Keysight E1370A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
