DynamicSignals / Kinetic Systems V387-ZA11 128-Channel Digital Input/Output
DynamicSignals / Kinetic Systems VXI Modules. Channels: Up to 128 digital input/output, Current: 5 mA to 15 mA (at rated voltage).
- Model
- DynamicSignals / Kinetic Systems V387-ZA11
- Calibration
- Available on request
- Price
- $2,800
- Status
- In stock
- RFQ ref
- V387-ZA11
This unit
The V387-ZA11 is a single-width, C-size VXIbus module delivering up to 128 digital input/output channels in a register-based architecture. Four interchangeable P300 series mezzanine cards, each supporting 32 channels, enable flexible I/O configuration. Engineers can deploy non-isolated bidirectional options (TTL single-ended or RS-422 differential) or isolated input modules rated for voltages from TTL through 120 V ac, all with programmable input filtering and 500 V isolation.
Technical Specifications
Form Factor: Single-width, C-size VXIbus module
Total Channels: Up to 128 digital input/output
Mezzanine Card Slots: Four P300 series cards, 32 channels per card
Non-Isolated Options: 32-channel TTL single-ended or 16-channel RS-422 differential
Isolated Input Voltage Ratings: TTL, 12 V dc, 16 V dc, 24 V dc, 28 V dc, 48 V dc, 120 V ac
Isolation Level: 500 V
Input Current: 5 mA to 15 mA (at rated voltage)
Switching Threshold (Turn-On): 75% of rated voltage, nominal
Switching Threshold (Turn-Off): 45% of rated voltage, nominal
Input Filter Time Constant: Programmable, 5 µs to 1 s in 64 steps
Read/Write Cycle Times: 16-bit at 1 µs typical; 32-bit at 2 µs typical
Key Features
Register-based module control with manual logical address setting via eight rocker switches
Trigger generation, interrupt on pattern recognition, and change-of-state detection
VXIbus Local Bus: 12 user-defined lines for daisy-chaining and private data paths to adjacent modules
TTL and ECL trigger line support; 10 MHz ECL clock access
Module ID line for geographic addressing
Optional Digi-bus interfacing via P500 (transmit) or P501 (receive) cards
Typical Applications Relay and solenoid control, lamp switching, digital signal acquisition from multiple device sources, and multi-channel test automation in VXIbus instrumentation systems.
Compatibility & Integration The module integrates directly into VXIbus systems and supports Kinetic Systems 5819-series cabling (5819-B, 5819-D, 5819-F, 5819-G). Optional Digi-bus cards extend communication capability within larger test environments.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 12 V DC, 120 V ac |
DynamicSignals / Kinetic Systems V387-ZA11 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the DynamicSignals / Kinetic Systems V387-ZA11. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common DynamicSignals / Kinetic Systems V387-ZA11 faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
DynamicSignals / Kinetic Systems V387-ZA11 price
This DynamicSignals / Kinetic Systems V387-ZA11 is listed at $2,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
DynamicSignals / Kinetic Systems V387-ZA11 calibration cost
NIST-traceable calibration for the DynamicSignals / Kinetic Systems V387-ZA11 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
