Astronics / EADS / Talon Instruments SR192 Digital Test Module
Astronics / EADS / Talon Instruments VXI Modules. Channel: count digital applications. This dual-slot C-size, Channels: ** 96 to 192 per module, Resolution: ** 5 ns.
- Model
- Astronics / EADS / Talon Instruments SR192
- Calibration
- Available on request
- Price
- $2,100
- Status
- In stock
- RFQ ref
- SR192
This unit
The Astronics/EADS/Talon Instruments SR192 is a VXI-based digital stimulus and response test module engineered for high-channel-count digital applications. This dual-slot C-size VXI module accommodates up to twelve I/O modules, delivering 96 to 192 digital I/O channels per unit with synchronization capability reaching 1152 channels across multiple modules. The SR192 supports TTL, ECL, RS485/422, and variable voltage logic (+/−15V or +5/−2V), configurable as single-ended or double-ended outputs with 50 mA source/sink current per channel.
Technical Specifications
Digital I/O Channels: 96 to 192 per module; up to 1152 channels with multiple synchronized modules
Timing Rate: 50 MHz maximum
Data Rate: 25 MHz; 50 MHz multiplexed
Memory Depth: 128 Kbits per channel (256 Kbits multiplexed)
Edge Placement Resolution: 5 ns
Channel-to-Channel Skew: 5 ns
Source/Sink Current: 50 mA per channel
Logic Options: TTL, ECL, RS485/422, variable +/−15V, +5/−2V
Memory Architectures: Stimulus, Tristate, Record, Expect, Mask
Data Formats: Hold, RTZ, RT0, RTC
Test Sequence Memory: 128 Kbits
Timing & Control Channels: 20 channels
Configuration: Single-ended or double-ended logic
Key Features
Modular front-end design supports SR115 bi-directional 16-channel modules, SR112/SR122 8-channel RS485 differential modules, SR125A, and SR214A variable voltage modules
SR101/SR101A Timing Set modules provide sequence control, UUT handshaking, pattern data management, and conditional testing with up to 128 K test sequence memory
Conditional and unconditional jump sequences with go-sub test capability
Parallel and serial bus emulation support
Optional SR210 Accessory Module (100 Hz to 50 MHz programmable clock) and SR110 DAC Module
SCPI-compatible command interface matching Talon BE-64 protocol
Typical Applications Digital functional testing, bus emulation, parallel and serial protocol validation, multi-channel stimulus/response characterization.
Compatibility & Integration VXI ecosystem; controlled by SR101/SR101A timing modules; integrates with SR110 DAC and EADS SR107 PIO accessory modules; SCPI message-based programming interface.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 50 MHz | Voltage / Current Range: '+/−15V, +5/−2V, 50 mA |
Astronics / EADS / Talon Instruments SR192 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Astronics / EADS / Talon Instruments SR192. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Astronics / EADS / Talon Instruments SR192 faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Astronics / EADS / Talon Instruments SR192 price
This Astronics / EADS / Talon Instruments SR192 is listed at $2,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Astronics / EADS / Talon Instruments SR192 calibration cost
NIST-traceable calibration for the Astronics / EADS / Talon Instruments SR192 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
